CAPT_BLOTTO
#Crush It
- Joined
- Jul 19, 2005
- Location
- Kansas City
I need to move my alternator to fit my turbo and specifically the wastegate, plus just to free up some room on that side of the engine. I've only found a few pictures of ones that may have been done years ago but lacking some details. The car is a 77 240 with no a/c and manual steering. I'm trying to keep the alt/crank and water pump with the shared belt(s)
Is the 7/9 bracket cut in half and then just moved down? And will it still clear the engine mount?
From an old thread
https://forums.turbobricks.com/showpost.php?p=1915444&postcount=9
This is my block today.
IMG_20180506_165616 by Brandon Porter, on Flickr
The 7/9 bracket would bolt to the pair of diagonal holes below where the ground cable is now?
Is the 7/9 bracket cut in half and then just moved down? And will it still clear the engine mount?
From an old thread
https://forums.turbobricks.com/showpost.php?p=1915444&postcount=9
This is my block today.
IMG_20180506_165616 by Brandon Porter, on Flickr
The 7/9 bracket would bolt to the pair of diagonal holes below where the ground cable is now?