home register FAQ memberlist calendar

Go Back   Turbobricks Forums > Mechanical > performance & modifications

Thread Tools Display Modes
Old 07-10-2017, 10:02 AM   #1
Board Member
Tfrasca's Avatar
Join Date: Apr 2015
Location: Santa Cruz, CA
Default Chevy S10 t5 tail housing in 140

I'm sure if anyone here had done this, I'd have been able to find it, but I haven't. So I'm asking.

At a glance, it seems like a Chevy S10 tail housing t5 might fit into an early 140 trans tunnel. The shifter is about 6 inches further back, so you'd have to cut a new hole, but I'm thinking you wouldn't have to weld a whole new tunnel in. Then you'd just make a shifter that's a little longer than a mustang T5 and a little shorter than the stock long 140 shifter.

Tfrasca is offline   Reply With Quote

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On

Forum Jump

All times are GMT -4. The time now is 03:11 AM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2019, vBulletin Solutions Inc.