• Hello Guest, welcome to the initial stages of our new platform!
    You can find some additional information about where we are in the process of migrating the board and setting up our new software here

    Thank you for being a part of our community!

Easy way to tell the driveshaft diameter?

durk80

durk80

Member
Joined
Nov 17, 2015
Location
South GA
I would like to buy the following parts for my mechanic to change out: flex plate, carrier bearing, and the rubber support bushing. Multiple sites list either 1.75'' or 2'' diameters. My car is a 91 240 with an open differential, and manual transmission. Any help would be great before I order the wrong parts!

Thanks guys!
 
I may be wrong, but I recall wagons and manual transmissions had the larger driveshafts. When I did my center bearing, just gave the VIN to the dealer and they were able to order in the correct parts.

Found the dealer to be very reasonable for prices on the bearing and center rubber support, but that was 4 years ago.
 
You must log in or register to reply here.
Back
Top