Shinchan
Member
- Joined
- Jun 28, 2018
- Location
- Lafayette, CO
I'm using an aftermarket fuel pressure regulator (one of the Ebay ones) with a stock B20 FI rail/loop for a Megasquirt install.
I don't seem to be able to get the pressure regulator to register any pressure on the gauge. I suspect that I just didn't install all of the lines in the correct spots. Anyone using a setup like this that can point me in the right direction?
Crude drawing for reference:
<img src="https://i.ibb.co/QdL4rJx/fuel-rail.jpg" alt="fuel-rail" border="0">
I don't seem to be able to get the pressure regulator to register any pressure on the gauge. I suspect that I just didn't install all of the lines in the correct spots. Anyone using a setup like this that can point me in the right direction?
Crude drawing for reference:
<img src="https://i.ibb.co/QdL4rJx/fuel-rail.jpg" alt="fuel-rail" border="0">