DCOE 240
New member
- Joined
- May 19, 2009
- Location
- Redding Ca
Everything could be moved out for the 16v how far are you talking.
Hello Guest, welcome to the initial stages of our new platform!
You can find some additional information about where we are in the process of migrating the board and setting up our new software here
Thank you for being a part of our community!
Finally got it done. Found a double sided belt. They don't make as many sized in the double sided as the single side. Had to move the tensioner and modify it a bit. Here is a couple photos of the new routing and belt.
Everything could be moved out for the 16v how far are you talking.
now you need only a chainbeltdrive for the cams and your engine will be maintainencefree
3-5mm I would have to double check then triple check that
I love it, So let me do that math here for the redblock. Never change the oil "check" Never add coolant "check" Never change the Belts "check"
Any further developments on this?
I put one of Aaron's setups on my 16vt motor...
I had the pulley milled down 5mm, to compensate for the wider timing belt. All looks to be in order, though the motor has not been fired yet.
Agreed!Bumpiedoptiedoo
Nathan, Yoshi, come in please, where is the kit?
I should buy
Yeah I'm tired of spraying my V belts with silicone spray every week to keep them quiet..
And the list of interested, willing to pay customers keeps on growing.
Bump.
This is a club I can join. Availability?
And the list of interested, willing to pay customers keeps on growing.
Bump.
I was supposed to get some parts from Jack to start making a set for him and myself, I'll send him a PM and harass him.