lummert
Active member
- Joined
- Jan 11, 2008
- Location
- Portland IN
The replacement Bosch 007 AMM changed the driving response a little, but it's still darn near dead off a start from stop, when warmed up. The initial start, then die issue did not recur.
I am wondering if the temperature sender for the ECM is bad. It is nicely buried under the intake manifold! Repaired the aux fan wires and it operates.
I have to see if Haynes has how to the set the plate and calibrate the TPS.
The aux fan is used with the A/C. The ECT can be replaced in about 15-20 minutes.