shorter timing belt specs.

got a head that has had some shaved off. I need to find a FORD PINTO (engine type) timing belt. what are the specs on the belts people are using?

would this belt work?
http://www.oreillyauto.com/site/c/detail/GATU/T014.oap?pt=C0074&ppt=C0007


I have searched but no one has a direct link to a shorter timing belt they are using. any info would be much appreciated!


edit' F! volvo b230f uses a 3/4" x 46 1/8" (123 Teeth) belt.
i cant find a 122 teeth belt! please much help with a link would be appreciated.

How much was taken off? At around 2mm+, you may need a shorter belt, but less than that should be fine with a stock length belt.

You could also contact Lawrence Knox (aka 'Fidel') and ask if he has one available.

https://www.rockauto.com/dbphp/mfr,GATES,Engine,5716,Timing+Belt <--- invaluable link to bookmark

Scroll down, looks like the 3rd one down will work. Gates T013, T089, or T158.

Bump. People were curious.

TB089 is the short round tooth belt(and MD140228 is another part number for it).

T013 is the square tooth belt short.