D.E
tvåförti
- Joined
- Sep 15, 2010
- Location
- Mora, Sweden
I need rear shocks, can you post the brand and maybe part number of the ones you used?
In for this. Mine are too short after putting in overloads.
Hello Guest, welcome to the initial stages of our new platform!
You can find some additional information about where we are in the process of migrating the board and setting up our new software here
Thank you for being a part of our community!
I need rear shocks, can you post the brand and maybe part number of the ones you used?
Any negatives to raising the spring cups versus just extending the strut bodies? Have you noticed any ill effects of doing this? I could get away with just raising the cups i think running the 27" mud tires i have.
I meant just cutting the spring cup and moving it up versus adding in length to the tube. I didn't know if "preloading" the spring any would lift the vehicle any. Im guessing probably not...In that it would move the spring itself up, and lengthen the assembly yes.
Quick! Someone tell me how these are going to kill me before I put them on my car.
I made a feeble attempt at one, but it doesn't matter good luck with yours.
Mine is about 2 1/2" higher than stock, 28 x 8.50 R14's on it.
I meant just cutting the spring cup and moving it up versus adding in length to the tube. I didn't know if "preloading" the spring any would lift the vehicle any. Im guessing probably not...
A bit late but for the rear, check out 32322 Monromatic shocks off a ford expedition. They are supposed to have the same collapsed length as stock but 4 inch more extension.