Roy 940
Active member
- Joined
- Sep 9, 2009
- Location
- Under the hood...
+1!
Hello Guest, welcome to the initial stages of our new platform!
You can find some additional information about where we are in the process of migrating the board and setting up our new software here
Thank you for being a part of our community!
ad?dic?tion [uh-dik-shuhn]
noun
the state of being enslaved to a habit or practice or to something that is psychologically or physically habit-forming, as narcotics or boost, to such an extent that its cessation causes severe trauma.
10afrs? Yikes that's rich!
Pretty easy to fabricate some engine-movement-limiters so the motor/tranny mounts aren't asked to do more than they should. I prefer those made of tie-down strap material. Softly limits the movement without transmitting any vibration. Just have to be thoughtful about where you place them. And of course one on each side - deceleration can move it just as much the other way.
Well - install it and put a piece of high density foam on the 'bend'. 'Course, there's still deceleration... Don't forget about your torque arm mount in the back --- as you are able to put down more and more torque - other stuff starts breaking.
Beware once you set it to higher boost. My car pings like crazy on boost transition when it's warm and dry out, even with browntops on.
Once it pings do you just stay on the throttle?
That boost is about as addicting as anything else. The smiles are endless.
Agreed on getting the tune better, that is too much fuel under full throttle.
Sean
.
First tank of gas only netted 18 MPG, and this one won't be any better
No, I back the heck off if I see it touch 13 on anything over 2-3 pounds. It has even pinged after the cbv vented on decel Anyhow, the enrichment in my car at WOT is ridiculous, as in <10:1. My tune is absolutely terrible.
Well I've had zero pinging since the break-in has begun. I shot an email to Mike (TLAO) regarding the rich WOT operations....no answer yet. Heading out into the garage and turn another rev on the MBC....see if we can hit 12 PSI this morning
Yes, considering another chip for the fuel ECU as a comparison. I've got what is supposed to be Fred's fuel chip in a 563 ECU (oldie but goodie), and I might have to install this weekend just to see if the WOT AFR's change with that one.