home register FAQ memberlist calendar

Go Back   Turbobricks Forums > Mechanical > performance & modifications

Reply
 
Thread Tools Display Modes
Old 05-13-2018, 09:21 PM   #1
Pillow
Sleazebag 7-9 Owner
 
Pillow's Avatar
 
Join Date: Dec 2015
Location: NoVA
Default Hydraulic Clutch MC thread size?

Hopefully easy question that has been eluding me. I figure someone else has run into the situation I am in for hydraulic clutch lines.

What is the thread size/pitch for the 7/9 Turbo clutch master cylinder outlet?

I need to run 4AN line from the clutch master cylinder to TO bearing and nothing I have on hand fits the Volvo clutch master cylinder.

Thanks!
__________________
#79WDP
2006 XC70 Wagon - "Chuck Feo" - Daughters ride - stock
1992 965 - "Savage Wagon" w LS 5.3 LM7 + LS7 cam + GM T5 swap in progress.
1983 Jeep Cherokee - LS 5.3 LM7 + LS9 cam + SM465 swap in progress
1971 Chevy C-10 w 5.3 LS (LS2 cam) & GM T5 trans
Pillow is offline   Reply With Quote
Old 05-13-2018, 10:49 PM   #2
thelostartof
unbalanced chemical
 
thelostartof's Avatar
 
Join Date: Jun 2002
Location: Apache Junction, AZ
Default

I had a custom line made a while back I never used. But for the life of me I can not remember what the thread was.
__________________
Chip Feedback Thread / PM LH 2.4 Chip Prices
thelostartof is offline   Reply With Quote
Old 05-14-2018, 12:45 AM   #3
hiperfauto
Board Member
 
hiperfauto's Avatar
 
Join Date: Nov 2011
Location: So Cal
Default

2 minutes worth of searching on Google turned up this thread that identifies the clutch master and slave thread as M12x1.0.

http://www.turbobricks.com/forums/sh...d.php?t=234399

Another 2 minutes on Google turned up this adapter fitting.

https://www.ebay.com/itm/AN3-to-M12-...-/332151286284
hiperfauto is offline   Reply With Quote
Old 05-14-2018, 06:53 AM   #4
DET17
Reformed SAABaholic
 
Join Date: Nov 2009
Location: NW Georgia
Default

Quote:
Originally Posted by hiperfauto View Post
2 minutes worth of searching on Google turned up this thread that identifies the clutch master and slave thread as M12x1.0.

http://www.turbobricks.com/forums/sh...d.php?t=234399

Another 2 minutes on Google turned up this adapter fitting.

https://www.ebay.com/itm/AN3-to-M12-...-/332151286284
Google force, strong in this one........
__________________
Project "cheap thrills" build thread: http://forums.turbobricks.com/showth...67#post4211467

Feedback thread: http://forums.turbobricks.com/showthread.php?t=198746
DET17 is offline   Reply With Quote
Old 05-14-2018, 10:31 AM   #5
Pillow
Sleazebag 7-9 Owner
 
Pillow's Avatar
 
Join Date: Dec 2015
Location: NoVA
Default

Thank You!!! I was stuck between the M10 and M12 debate and the only reference I could find was from Dave B's site which was for a 260 setup and not 7/9.

I ordered this: https://www.ebay.com/itm/1-Steel-Ban...MAAOSwdIFX1ziF
Steel Banjo Bolt Fittings M12 x 1.0 (Metric 12mm) to 4AN -4 AN4

I chose a banjo to get the 90 degree angle as there is not much space to spare with the shock tower.

Once fitted, I will report back.
Pillow is offline   Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On

Forum Jump


All times are GMT -4. The time now is 12:09 AM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2018, vBulletin Solutions Inc.