home register FAQ memberlist calendar

Go Back   Turbobricks Forums > Mechanical > maintenance & nonperformance

Thread Tools Display Modes
Prev Previous Post   Next Post Next
Old 11-20-2020, 02:59 AM   #1
Join Date: Mar 2009
Location: Tāmaki Makaurau, NZ
Default Will she blow?


Note the odd chirping/ ticking noise?

Motor has cleaned up 531. Head is decked, valves lapped (not by me), lash correct. Running the mis-ground iPd turbo cam from many years ago, was running at 2 deg advanced for years in stock 530 head. Timing seems off, I have modified dizzy to allow for the out of alignment keyway. Matches the original bad distributor, with new hall sensor wiring

89 b230ft, Lh2.2, leads, plugs, TPS reset and idle adjusted, new water pump, heater bypass valve, bypass hard pipe, yoshi turbo drain, phenolic inlets spacers.

Vac is good, vacuum lost in time with that chirp/tick. Any suggestions?

Last edited by RichGT; 11-20-2020 at 04:05 AM..
RichGT is offline   Reply With Quote

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On

Forum Jump

All times are GMT -4. The time now is 05:50 PM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2021, vBulletin Solutions Inc.