GreatDaneShane
HBIC
- Joined
- Jul 28, 2007
- Location
- Houston, Texas
4" out the back dumped under the trunk with the stock pipe welded to the turndown so it looks stock
Hello Guest, welcome to the initial stages of our new platform!
You can find some additional information about where we are in the process of migrating the board and setting up our new software here
Thank you for being a part of our community!
It may be a bit pricier, but I recommend this:
https://www.diyautotune.com/shop/mspro-efi-ems/ms3-pro-pnp-drop-on-engine-harnesses/
Small update, sorry no photos since none of it is really particularly interesting.
Transmission harness cut, pinned and installed.
Engine harness cut, pinned, and installed
Fuel Pressure & Oil pressure sensor wiring installed
14.7 Spartan wide band installed.
450 walbro, corvette filter/regulator & fittings on the way.
Still need to decide on injectors, the vette regulator will be at 58 psi, so the cheap deka 80 injectors may be a bit big for this mild of an engine. I am thinking about 60's instead...
Also trying to convince myself to buy a racepak IQ for the dash, but I have never driven a car with one before so I can't decide if it is really worth the money...
You are gonna wanna return that Corvette regulator and convert to a boost referenced return style fuel system
You are gonna wanna return that Corvette regulator and convert to a boost referenced return style fuel system