• Hello Guest, welcome to the initial stages of our new platform!
    You can find some additional information about where we are in the process of migrating the board and setting up our new software here

    Thank you for being a part of our community!

940 M90 clutch setup 500whp+

stonie

New member
Joined
Apr 3, 2016
Location
Switzerland
Sure somewhere are still some threads about this but with my english i dont know how to search!?

what clutch setup is good enough to handle 500whp+ and 600nm torque.

searching for a "normal" clutch with torsion springs and single disc.

flywheel? dogdish?

Links to threads are welcome.
 
Sachs -712 PP, some kind of 4/6puck sinterclutch disk and a flywheel that fits (standard dogdish with a litte bit of work).

Almost bolt-on solution
 
I'd recommend the ttv flywheel that is made for the 707 and 765 with use of the 850 style clutches. I love my lightweight flywheel from ttv with the 850R clutch.
 
Sure somewhere are still some threads about this but with my english i dont know how to search!?

what clutch setup is good enough to handle 500whp+ and 600nm torque.

searching for a "normal" clutch with torsion springs and single disc.

flywheel? dogdish?

Links to threads are welcome.

You sure you have 600n/m?


228mm STAGE IV - Handles 420 ft. lbs. of torque with stock disc.
Good price and matches nice steel flywheel with 60-2.

That combo is less that the crazy ass Sachs Racing pressureplates in EU.
 
You sure you have 600n/m?


228mm STAGE IV - Handles 420 ft. lbs. of torque with stock disc.
Good price and matches nice steel flywheel with 60-2.

That combo is less that the crazy ass Sachs Racing pressureplates in EU.

had 630nm at 1.4 bar of boost with 9.5:1 compression now im going to 8:1 compression and about 2.2 bar of boost.

so 600nm is what the clutch should hold for sure...


thanks for your reccommendations
 
Back
Top