home register FAQ memberlist calendar

Go Back   Turbobricks Forums > Mechanical > maintenance & nonperformance

Reply
 
Thread Tools Display Modes
Old 03-09-2019, 07:24 PM   #1
tshawytscha
Board Member
 
Join Date: Apr 2016
Location: Vancouver, WA
Default Attn PDX tbrickers: need an injector!

So, figured I'd do some maintenance it being a nice sunny day. Was going about replacing injector seals and dropped an injector and broke the plastic tip area. If it ain't broke break it right? I'm assuming that means it's shot. Are there any locals that have a spare greentop injector laying around that they'd be willing to sell me?
tshawytscha is offline   Reply With Quote
Old 03-09-2019, 07:29 PM   #2
sbabbs
Board Member
 
sbabbs's Avatar
 
Join Date: Dec 2006
Location: Rushing Lane, Scappoose, OR
Default

I got plenty out here in Scappoose. But is the little pointy thing on the bottom of the injector bent? If not it might be okay. You don't need that plastic bit on the bottom at all I don't think. Seems like I had to take those off the ford browntops to make them fit, or to put new injector seals on the bottom.
__________________
1988 245 White slicktop M47 Wagon! 2.5L NA 8v going in.
1990 745 B230FT Getrag JohnV flywheel 240mm clutch 13c A-cam 3.54 G80 548K MILES
1991 740SE B230FT NPR Strut braces IPD bar A cam 550cc EV14's. 3.73 G80 M90 to put in.
sbabbs is offline   Reply With Quote
Old 03-09-2019, 07:29 PM   #3
Redwood Chair
K-jet For Life
 
Redwood Chair's Avatar
 
Join Date: Mar 2007
Location: - Stock PSI Or Bust -
Default

https://www.picknpull.com
__________________
Raise The Lowered


Image hosted by servimg.com

Quote:
Originally Posted by hiperfauto View Post
Folks on here don't know a good deal when they see it.
how psi stock cna support?

Redwood Chair is offline   Reply With Quote
Old 03-09-2019, 07:32 PM   #4
sbabbs
Board Member
 
sbabbs's Avatar
 
Join Date: Dec 2006
Location: Rushing Lane, Scappoose, OR
Default

YEah there is a picky pull in vancouver still in business, way closer.. That being said do they have a turbo 740 or 940 in the yard?
sbabbs is offline   Reply With Quote
Old 03-09-2019, 07:34 PM   #5
sbabbs
Board Member
 
sbabbs's Avatar
 
Join Date: Dec 2006
Location: Rushing Lane, Scappoose, OR
Default

Found this, says it's 16v.. No greentops then..


Pick-n-Pull - Tumwater
8010 Old Highway 99 SE • Tumwater, WA 98501 360-357-4466 Store Layout Map|Part Pricing
Photo


Engine 2.3L L4 DOHC 16V
Trans 4-Speed Automatic | 5-Speed Manual
Color WHITE


Set Date
1990 Volvo 740 Wagon 20 02/5/2019
sbabbs is offline   Reply With Quote
Old 03-09-2019, 07:46 PM   #6
tshawytscha
Board Member
 
Join Date: Apr 2016
Location: Vancouver, WA
Default

The metal tip does not look bent. Good to go?

https://photos.app.goo.gl/5y1igKJbyQZbSB7x7
tshawytscha is offline   Reply With Quote
Old 03-09-2019, 07:49 PM   #7
sbabbs
Board Member
 
sbabbs's Avatar
 
Join Date: Dec 2006
Location: Rushing Lane, Scappoose, OR
Default

Yes your fine.
sbabbs is offline   Reply With Quote
Old 03-09-2019, 07:55 PM   #8
tshawytscha
Board Member
 
Join Date: Apr 2016
Location: Vancouver, WA
Default

Sweet. Thanks guys.
tshawytscha is offline   Reply With Quote
Old 03-09-2019, 08:00 PM   #9
hiperfauto
Board Member
 
hiperfauto's Avatar
 
Join Date: Nov 2011
Location: So Cal
Default

An injector seal kit will come with a new pintle cover.

https://www.rockauto.com/en/partsear...um=+1287010704

hiperfauto is online now   Reply With Quote
Old 03-09-2019, 10:52 PM   #10
mblue240
Board Member
 
mblue240's Avatar
 
Join Date: May 2007
Location: Portland, Oregon
Default

I have all these down in Beaverton. I also have part of a rebuild kit left over and you're welcome to have the little cap.

https://forums.tbforums.com/showthread.php?t=301784
__________________
-Michael

Tbricks build

Quote:
Originally Posted by b4_ford View Post
In Oregon, 5 Volvos in a parking lot isn't a meet, it's just a daily coincidence!

Quote:
Originally Posted by NChoy View Post
Yep, Michael is right.
mblue240 is offline   Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On

Forum Jump


All times are GMT -4. The time now is 06:03 PM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2019, vBulletin Solutions Inc.