• Hello Guest, welcome to the initial stages of our new platform!
    You can find some additional information about where we are in the process of migrating the board and setting up our new software here

    Thank you for being a part of our community!

My 940: the full retard

I haven?t uploaded on here in forever but that doesn?t mean I haven?t been working on the car. I?ve got my shop to where it?s functional:

<a href="https://ibb.co/jk7J6Pn"><img src="https://i.ibb.co/jk7J6Pn/D5-E25-DBA-4-EAE-4871-8550-FCA97-EDBE1-A2.jpg" alt="D5-E25-DBA-4-EAE-4871-8550-FCA97-EDBE1-A2" border="0" /></a>

And bought Kenny?s pnp microsquirt wired it for flex fuel:

<a href="https://ibb.co/F4xn6G9"><img src="https://i.ibb.co/F4xn6G9/E4-B36-E84-E2-C0-41-EB-A507-1-E053-E481217.jpg" alt="E4-B36-E84-E2-C0-41-EB-A507-1-E053-E481217" border="0" /></a>

And took it down to Kenny to get it dynotuned:

<a href="https://ibb.co/r4gmdx6"><img src="https://i.ibb.co/r4gmdx6/F9-C48599-4-F8-D-4403-A552-A2795307-DFE7.jpg" alt="F9-C48599-4-F8-D-4403-A552-A2795307-DFE7" border="0" /></a>

<a href="https://ibb.co/PcByf9c"><img src="https://i.ibb.co/PcByf9c/E785-D96-F-6012-408-A-9108-4-B63-C4-AFC240.jpg" alt="E785-D96-F-6012-408-A-9108-4-B63-C4-AFC240" border="0" /></a>

Kenny worked his magic and got 280/320. I?ve been mad stoked on it. I?m currently working on a launch control solution. I?m going to do a better job of documenting that.
 
I'm just curious, do you know what the angle of your transmission is? How is the one-piece driveshaft? I'm still working on correcting the angles on my two piece.
 
2 degrees downward at the transmission and 1.3 upward at the diff and the diff is sitting about an inch lower than the trans center to center.
 
<a href="https://ibb.co/g7SZqHb"><img src="https://i.ibb.co/g7SZqHb/CFE65-B1-F-0-EF0-4-F6-E-AC4-F-74-EFA92385-ED.jpg" alt="CFE65-B1-F-0-EF0-4-F6-E-AC4-F-74-EFA92385-ED" border="0" /></a>

<a href="https://ibb.co/jWnhWM2"><img src="https://i.ibb.co/jWnhWM2/27-D1-B8-AE-1553-47-A2-A00-C-A228-E0-C14-D9-F.jpg" alt="27-D1-B8-AE-1553-47-A2-A00-C-A228-E0-C14-D9-F" border="0" /></a>

I do still work on this thing I just never post about it. The thread blew out the head on the 3rd cylinder so I?m fixing that currently, and probably going to pull the trans and have it rebuilt because it?s unhappy.
 
You must log in or register to reply here.
Back
Top