![]() |
![]() |
![]() |
![]() |
![]() |
![]() |
![]() |
![]() |
![]() |
![]() |
![]() |
![]() |
#126 |
What, me worry?
![]() Join Date: May 2003
Location: Acworth, Ga. USA
|
![]() We should do a local road trip
__________________
I coulda had a V8! |
![]() |
![]() |
![]() |
#127 |
Board Member
Join Date: Nov 2018
Location: Acworth, GA
|
![]() Yes, definitely. Just let me get some test miles on it first.
__________________
-Ryan |
![]() |
![]() |
![]() |
#128 |
Board Member
Join Date: Oct 2004
Location: Antioch, CA
|
![]() Sounds good, that motor looks at home in there. Every time I see a 5.0 on craigslist or Marketplace I go hmmmmm?
__________________
......... |
![]() |
![]() |
![]() |
#129 |
Board Member
Join Date: Nov 2018
Location: Acworth, GA
|
![]() I had to pull the transmission back out. I took a chance on this used T5, and it didn’t quite work out. It won’t fully engage first and second gears. Inside looks great, just need to figure out why it won’t go into those gears. At least I’ll learn how to work on a T5.
|
![]() |
![]() |
![]() |
#130 |
Board Member
Join Date: Nov 2018
Location: Acworth, GA
|
![]() Disassembled the transmission and found a few problems. The 1-2 slider had significant wear causing binding in 1st and 2nd gears. 1st wouldn’t even engage. This caused broken shift fork pads. The gears, bearings, and synchros look great, but I’ve ordered a rebuild kit anyway while it’s out and on the bench.
|
![]() |
![]() |
![]() |
#131 |
Board Member
Join Date: Nov 2018
Location: Acworth, GA
|
![]() I rebuilt the T5 transmission, and it works great. I’ve put about 20 miles on the car now with just a couple minor issues. I hope to have those solved this week and put some more test miles on the car. So far, I’m really loving it. Drives great, handles amazing, and the brakes are insane.
![]() |
![]() |
![]() |
![]() |
#132 |
Board Member
Join Date: Mar 2004
Location: Lancaster, PA
|
![]() w00t!
|
![]() |
![]() |
![]() |
Thread Tools | |
Display Modes | |
|
|