1984 242 TIC Texas

[atomicdeathmonkey]

Yeah me too, I was doing it so I could drop it off to be painted eventually if it turned out to be rough !

Daytime shot

[kampman]

That really transformed the look of the car, nice work!

[atomicdeathmonkey]

20210129_135912 by V G, on Flickr

I cleaned up the old plastidip covered headlamps - they were really clean underneath so happy to have some spares - they have a plain black piece instead of the reflector - presumably off a DL?

I realised that I had to lacquer the various bits to keep the grease off them - handy having a basketball hoop - perfect spray rig!

20210129_160135 by V G, on Flickr

Got my oil filter relocation kit - still haven't re-tried removing the old one yet - Was thinking I'd like to get the car started and up to temp with some oil/ engine cleaner in there first, then dump it out and then attach my new fancy remote oil filter kit!

20210129_154620 by V G, on Flickr

And yes I'm getting it because the stock location sucks ikea meat balls, I'm used to a w124 and it's a piece of cake by comparison.


The tedious little bits I'm enjoying a lot - Cheap therapy after burning my eyes out on a laptop all day !

20210124_150116 by V G, on Flickr

I'm trying to think of waht to do with the wheels - two are black and two silver original, I'm thinking of a few different things.

1. Gunmetal - but it's a bit dark on the grey car

Screenshot_20210129-164955_Gallery by V G, on Flickr

2. Darker centre - reminds me of what people did with amg pentas in the 80's

Screenshot_20210129-165143_Pinterest by V G, on Flickr

Nice wheels to whoever threw those images online btw!

Failing that I'd love a set of mesh something or others but I'm not cutting the body/fenders for fitment - benz is done like that and it's not for me!

If anyone wants some 5x5 rims hit me up! They're et 14 and I do not have adapters but they sure look pretty!

20210112_182439 by V G, on Flickr

[atomicdeathmonkey]

20210130_193309 by V G, on Flickr

Re-did the pressure test - got to 75 psi then the gas started hissing past the old crush washers - supposed to have a set coming from Mk1 AutoHaus but I'm pretty confident my pressures are ok, hopefully, they arrive soon.

So in the meantime, I started looking at the intercooler charge pipes and I didn't like the look of them!

20210130_185729 by V G, on Flickr

Let's just say it was a pain in the rear, I didn't go mad into the polishing - just a test of concept - I'll eventually go to town once I have a bench grinder I can put a polishing wheel on, this was all done with a harbor freight dremel, a brass wirewheeling, some 600 grit and polish.

20210130_235021 by V G, on Flickr

20210130_235035 by V G, on Flickr

A good 10 foot job, don't look too close!

20210130_235043 by V G, on Flickr

Tomorrow, Oil I got for free from a neighour - great as I'll be dumping it shortly after I start it up and run some engine cleaner through.

[atomicdeathmonkey]

So I couldn't help myself, now I need spacers but given that I paid what I'd have paid for a set of tyres / paint for the virgos I'm happy enough.

Hopefully I can shift the chevy wheels soon to get the right spacers to make them fill those arches and away from the fiddly bits

[Vol242vo]

Chrome Propus? They look great, completely changes the car. Beautiful.

[atomicdeathmonkey]

I almost never name cars unless it's Bessie, every car I've had is called that, and for no good reason. Since this car looks pretty but loves sitting I'm naming her "sitting pretty."

I'm going to have to keep tipping along at the body/interior restoration myself but man I'm burnt out on the mechanicals. I'm looking for a decent Volvo mechanic/specialist in the Dallas area to get her running. I'll do one more sweep but I'd just love to drive it at this stage.

So if anyone has any recommendations or a fellow turbobricker who knows what they're about, please reach out. It's easier to earn the money than spend the time at present!

In the meantime - beauty shots - setting these up for before and afters of when I repaint the black trim and apply the beltline kit!

20210201_122338 by V G, Flickr에서

20210201_122911 by V G, Flickr에서

20210201_122923 by V G, Flickr에서

20210201_122904 by V G, Flickr에서

20210201_122400 by V G, Flickr에서

And don't worry

from Imgflip Meme Generator

[atomicdeathmonkey]

20210201_142514 by V G, Flickr에서

I love it when stuff you ordered a while ago comes in to brighten the day!

Finally located the correct coolant bottle strap

20210201_171059 by V G, Flickr에서

20210201_171249 by V G, Flickr에서


Had to buy the owners manuals too - all unused too which is nice to have.

20210201_171807 by V G, Flickr에서

20210201_171801 by V G, Flickr에서

And yes one of the hood hinges just isn't sitting down properly!

[Murploid1]

Let me know how you get on / how you manage to fix that hood hinge? I replaced a hinge recently and the hood doesn't sit down - looks EXACTLY like yours.

[atomicdeathmonkey]

Yeah I'm hoping I can adjust it somehow, haven't looked into it too much yet.

Project on hold at the minute, have a massive dentist bill to pay four root canals ain't cheap!

[atomicdeathmonkey]

So some AliExpress happens to us all occasionally, fit quite nicely, the power adapter needs an original cover plate trimmed out to fit well. The zombie light fits perfectly in the empty slot.

The last pic is the reason the project spend is on hold at the min. 6-8k of flipping dental work, that's with insurance.

[atomicdeathmonkey]

I love it when bits you ordered weeks back arrive by the door.

Gt strut braces and a mudflap, the adapters are on backorder right now

I've been polishing the intercooler pipess, not trying for show car grade but kinda meet the level of the rest of the car!

Finding it difficult to get out to work on it since the decent weather kicked back on in Texas! Much more craic driving around in the Benz...

[atomicdeathmonkey]

Fitted the struts and cut out the old cruise control crap!