• Hello Guest, welcome to the initial stages of our new platform!
    You can find some additional information about where we are in the process of migrating the board and setting up our new software here

    Thank you for being a part of our community!

Mr.Borrie's 760 TIC

yeah pretty exited, hope the doors and bodykit will be done soon too.
Looking to set a date to already drop in the engine and gearbox, they are at the garage too already.
Need to look for the flywheel and bolts still though.. they are in one of my own garages XD
 
Car is starting to look very good.

If you ever decide to sell those borbets let me know.
 
Update from the paintshop

<a href="https://ibb.co/ZXsS6Yj"><img src="https://i.ibb.co/sRSCv6f/29690-A4-D-DF14-436-F-9143-6-E47-E56-C6055.jpg" alt="29690-A4-D-DF14-436-F-9143-6-E47-E56-C6055" border="0"></a>
<a href="https://ibb.co/3y7xQQd"><img src="https://i.ibb.co/0jc0vv2/9-FE6-CB14-8-D9-F-463-E-9-DFC-1-FF20-E67-C3-E4.jpg" alt="9-FE6-CB14-8-D9-F-463-E-9-DFC-1-FF20-E67-C3-E4" border="0"></a>
 
Thumbs up on amazing paint. Have not followed rest of thread but the cars in the paint pictures are awesome. Yours too? Volvo museum gold mine.
 
Went to help with assembly today

<a href="https://ibb.co/YPPRF4z"><img src="https://i.ibb.co/7jjYdxw/26678994-1058-4931-98-A6-50-CF1-F29-F738.jpg" alt="26678994-1058-4931-98-A6-50-CF1-F29-F738" border="0"></a>
<a href="https://ibb.co/VpLzQdz"><img src="https://i.ibb.co/rfQzcgz/C32-F40-BD-0-C29-4-C51-8590-4238-C9-B6-E658.jpg" alt="C32-F40-BD-0-C29-4-C51-8590-4238-C9-B6-E658" border="0"></a>
<a href="https://ibb.co/HP1dCvs"><img src="https://i.ibb.co/s1kHCSG/21352238-B52-B-4-EBE-B94-C-D38-C616-B55-E8.jpg" alt="21352238-B52-B-4-EBE-B94-C-D38-C616-B55-E8" border="0"></a>
<a href="https://ibb.co/gjf22TZ"><img src="https://i.ibb.co/ngYGGcM/3-C8-AC713-7-ECD-4973-BE7-C-CD4-C6-CFA4-A4-A.jpg" alt="3-C8-AC713-7-ECD-4973-BE7-C-CD4-C6-CFA4-A4-A" border="0"></a>
<a href="https://ibb.co/vhXz8xb"><img src="https://i.ibb.co/r3dyJGg/B485-CB75-D999-44-CD-BFFC-C6157326-A643.jpg" alt="B485-CB75-D999-44-CD-BFFC-C6157326-A643" border="0"></a>
 
Installed the last needed parts to get White Rice back, Prepaired the M90 to accept the TTV flywheel (washers 5mm).
Attempted to install the engine but apparently at some point i installed the wrong mounts, seems that one of them is for hydro mounts (not sure witch one)

Now back at home and engine back in the crane for now

picture.php

picture.php

picture.php

picture.php

picture.php
 
Last edited:
Boris spaced out the pivot ball for the clutch fork inside the the M90. Lot of guys do it for the travel on the clutch pedal.
 
i c.. cant remember if i had done this.. i always thought the clutch is missing some preload but thats not adjusted via the pivot ball
 
so i have been building the car back up again but in the last years of being apart plus the painter loosing all the body clips, brackets etc etc (so no panel can be mounted etc) i decided to get a old nose 700 serie parts car.. prove to be more difficult than i thought but i got one!

trunk plastics, clips and carpets have been swapped and now for the fender clips of the body so i can finally hang it all straight up and tight.
Also considering the blacktrim VS the chrome ...

picture.php
 
Last edited:
Back
Top