• Hello Guest, welcome to the initial stages of our new platform!
    You can find some additional information about where we are in the process of migrating the board and setting up our new software here

    Thank you for being a part of our community!

Just another B234FT Conversion..

mh... they are from turbo-parts.de... not offered as swivel... but you can rotate them... but how can it seal properly when the hose rotates on that conical tube?!!
 
So... no one on the fitting Problem? :/



installed my boostcontroller yesterday...

IMG_3307.JPG
 
Last edited:
IMG_3412.JPG


Bought Recaros off a Audi S8.. the preowner fitted a console to them, so this was PnP.. bam.. im sitting like god himself now :D

Passanger side not completed.. will do this week...

Oh.. every e-stuff is working.. and pneumatic lordose stuff :)
 
Last edited:
Im pretty pissed by the car right now...


we drove a bit yesterday to time the ignition, so we installed a MultiLevel Voltagerelated Knockcontrol... short Multi Meter ;) to the Knockwire.. he put always 1-4-3 on port 6 beyound 3500rpm.. so i must have garbaged something or it doesnt like the MM in that line cause of any signals from it ?? Dunno.. Will rewind everything today in the afternoon when its dry outside... doesnt lokk like good weather right now...


Heres a pic from my Knockkontrolle ;)
IMG_3463.JPG


Oh... and my new boostmeter ;)
IMG_3350.JPG
 
Last edited:
Yeah.. this knockcontrol doesnt work out.. the ezk puts out an error (143) on 6 @ exactly 3500rpm.. also when the multimeter is plugged of.. and this is the part where my mind goes to standby... how ?!! its just a cable connected to the knockcable ?!

anyway... no step ahead... this makes me rly ARRR !!

When flooring it it goes to 0.9bar boost and it runs super rich then... hmpf..
 
Ok.. bought a Turbom?ssa ;) (Turbopampers)

IMG_3544.JPG


IMG_3545.JPG




I also went to a professional MOT guy whos specialised on legalizing JDM-Cars for german T?V..


He said my car has great chances to pass german MOT without any circumstances which makes me rly happy :)


I have to do some things till then like recirc the BOV (RS-Type) recirc the PCV, install dirtsave for enginebay, change the servopump(broken)


Also i will trailer the car to my BoschBuddy ;) to make a final mapping cause i have catched a dynoslot in early november... so its getting to its End yeah...
 
Last edited:
moved the thread.

you should update the first post with some information on the car. ;-)

and if you want to change the title of the thread to something more descriptive, let me know
 
Thanks towery :)

Updated the first post...


This car has a break until our garage lift is installed.(Got a new garage next to my door but also my old one... but thats 120km to drive one tour.. so i can only work every 3-6 weeks on my stuff... next season will be the season of progress !! :) ...i hope..

Also we have to do some cars before i can work on my car again...




But... my new TIG-Welder is ordered and should arrive this week.. so be prepared for some Twinscrollheader**** ;)

I'll be able to weld the BOV setting I've wanted on my own.... yeah :)

http://www.stahlwerk-schweissgeraete.de/de/acdc-wig-200-puls-mit-plasma-s.html <--- that one...



Besides that i have a new 93' 245 which i want to rebuild as a racecar for sprintraces in Denmark on Padborg Park.. You can find it here in the projects showroom...



/edit


I totally forgot to mention my new Headlights :)

New Headlights with blackframe mod.. looks quite *bam*
IMG_3356.JPG

Tried also a foil.. but it was announce smoke.. and not pre-bigbang black :D peeled off again already..

IMG_3359.JPG


IMG_3360.JPG


IMG_3361.JPG
 
Last edited:
Yeah.. suddenly ;) Some updates..


bought some COPs for my COPmod..


IMG_4207.JPG


IMG_4208.JPG


IMG_4209.JPG



More pictarz when the Mod is done or while i'm doing it ;)
 
Last edited:
Bought 5 3" V-Bands with male/female groove on them...


They are very high quality for a reasonable price.. go visit http://hinritech-performance-shop.de/ to buy them :)



Pics will follow today in the evening or tomorroy.. my GF took the car for work where they are in the Trunk...


Plan is to remove als rubbish clamps and make the Cat interchangeable with a straight pipe for some Flameaction with the Buchkaboard :) Also to seal it properly ... but more for flameaction ;)






p.s. A little Infomation to all who come here via Link from the German Volvo Forums.. Sry for the troubles in my Buildthread.. It is closed/deleted or moved cause of the childish behaviour by the Forums Admin.. Thank you for watching this and giving me feedback all the time. It will go on, just bookmark this Thread. Turbobricks? Thanks for your Openness! :)
 
Last edited:
And the pics...



The V-Bands from Hinritech are the same as KLRacing...but 12€ cheaper :) That makes it when buying 5...

IMG_4272.JPG


IMG_4273.JPG


IMG_4274.JPG


IMG_4275.JPG


IMG_4276.JPG






Oh.. btw... the Instrument Cluster has a shizzload of parts :D

IMG_4265.JPG



Doenst work.. grounding problem or something like that... and i wanted to eliminate this before next season... sometimes it does this.. http://www.youtube.com/watch?v=ZEjR9SB2qgo ;)
 
Last edited:
Back
Top