• Hello Guest, welcome to the initial stages of our new platform!
    You can find some additional information about where we are in the process of migrating the board and setting up our new software here

    Thank you for being a part of our community!

Pdx dl

Cool town from what I have seen. Though this is usually a quick turn around visit.

Its alright, I grew up there. Its pretty similar to Vancouver. Lots of sprawl, lots of strip malls, little brother complex (Spokane vs Seattle, Vancouver vs Portland)

Lots of good breweries and downtown has cleaned up a lot. And you can still buy a house
 
I hate polos


40a12120b6a092a51a062a01e812001d.jpg
 
No time to play. Ordered some DO88 for the bigger turbo inlet. WG bracket from ATP arrived. Looks nice.

Now that I have the firmer springs, I am thinking about going from the 22mm to a 19mm rear sway.

After that it's just the exhaust work. I think.

My car is going to be soo fast...



683B7EAF-312A-4CF5-BF9C-31452B3164D1-M.jpg
 
First drive! Open down pipe. Let?s roll.

Way down on power. Won?t rev. 7 psi. Dang.

Next day, move timing from -2 to 12*. That?s better. Twist the knob-of-power a few times and we are ripping at 12 psi baby. Woot.

Now I am learning new concepts about the difference between boost and volume. Maybe I should back down to 10 psi again until we get the wide band plumbed.
 
Back
Top