• Hello Guest, welcome to the initial stages of our new platform!
    You can find some additional information about where we are in the process of migrating the board and setting up our new software here

    Thank you for being a part of our community!

My V70R awd auto

swede®

New member
Joined
Sep 12, 2006
Location
Rosvik (Pite), Sweden (former Dallas, TX)
  • 2,3 turbo
  • AW50-42LE AWD
  • 19T from -00 V70R
  • Ferrita SS 3" DP & Race cat
  • Airbox -00 V70R
  • LMM -00 V70R
  • 525cc Delphi injectors
  • 18-20 psi boost
  • OEM aux trans cooler (in process of installing)
  • Full pressure, transmission (in process of installing)
  • Torque limiter limited (in process of installing)
  • Italien BWA 7x17 wheels
  • 225/45-17 tires
  • 7 window tint
  • XC grill
  • A-pillar pod
  • Wideband gauge
  • Boost gauge
  • Trans temp gauge
  • Blitz electronic boost control
  • R-logo door knobs
  • Dolby Pro Logic stereo with factory remote
  • Fully loaded exc sunroof
  • Logging software

Linkoping2.jpg

Linkoping5.jpg

Linkoping9.jpg

Linkoping11.jpg

Linkoping12.jpg

Linkoping14.jpg

Linkoping4.jpg

Bild000.jpg

Bild001.jpg

Bild002.jpg


Winter pix

DSC00604.jpg

DSC00613.jpg

DSC00609.jpg


Bild_009.sized.jpg

DSC00252.jpg

CD_OBD_Kabel_Ser.jpg

DSC00404.jpg

DSC00405.jpg


Bone stock time on laptop

DSC00490.jpg

DSC00487.jpg

DSC00682.JPG


There you go guys, just a couple of pics of my baby :):)

About myself, well been working as an auto tech for over 25 years now.
1997 to 2004 i lived in Dallas, TX and worked as a tech for Chrysler, Ford and a small high performance shop, currently i'm living in my home town (Lule?, Sweden) and running a one man transmisson shop.

Been lurking here for a while and thought it's time to introduce myself :):)

Take care and be safe out there, ok.
 
Last edited:
Installed oilpressure gauge for the transmission so i can monitor the pressure when i start playing with the TCM controlls :):)

pressure%20gauge.jpg


But i have to find a different feed location, the test pressure port isen't good enough. The valvebody have a valve that close the feed at certain speed and rpms so the gauge drops to 0 a lot :(
 
Back
Top