Tox_Slaughter
Brick Lover
- Joined
- Nov 7, 2015
- Location
- Portland, OR
I'm using Permatex High Performance Thread Sealant on the fuel coupler threads between the main pump and the accumulator. I've done this job in the past (other kjet car) without any issue but having a heck of a time on this pump replacement.
Question - if you have used this thread sealant how long did you let the sealant cure before running the car? Product data sheet say 24 hours set time and completely cured in 72 hours.
While I enjoy working on my Volvo's I'm getting too familiar with the main fuel pump setup.
Thanks!
84 244 Turbo Kjet
Question - if you have used this thread sealant how long did you let the sealant cure before running the car? Product data sheet say 24 hours set time and completely cured in 72 hours.
While I enjoy working on my Volvo's I'm getting too familiar with the main fuel pump setup.
Thanks!
84 244 Turbo Kjet