home register FAQ memberlist calendar

Go Back   Turbobricks Forums > Symposium > article composition

Reply
 
Thread Tools Display Modes
Old 01-06-2017, 08:46 PM   #301
lookforjoe
Board Member
 
lookforjoe's Avatar
 
Join Date: May 2008
Location: Rockland County, NY
Default

Quote:
Originally Posted by boosted12a View Post
i used a 6 Cyl j somthingn or other ignighter from a mitsubishi and it works just fine. i ran the tach out put to the stock tach wire on the powerstage plug(red/white) and i also had to wire in the dummy relay to get the tach to work.
I didn't pay attention to the fact that the J723T power stage was for 6 cyl - I found that the tach signal from it doesn't work with my tach either. Added the relay with transistor - 86 to +, 85 to tach feed, 30 to ground. I still have the stock powerstage wired, so powerstage pin 1 feeds into the tach circuit via the original coil (1) terminal. I didn't need to add the EZK pulse signal. Without the ground, the tach didn't seem to register correctly. Have to tidy up all the wiring now.

__________________

My XR July2013 - 446AWHP @ 8K rpm

Last edited by lookforjoe; 01-06-2017 at 08:55 PM..
lookforjoe is offline   Reply With Quote
Old 01-06-2017, 10:07 PM   #302
Duder
His Dudeness, El Duderino
 
Duder's Avatar
 
Join Date: Dec 2009
Location: Torrance, CA
Default Wasted Spark Distribution

Quote:
Originally Posted by Dannyt0186 View Post
Is it just me or are people having problems getting a hold of Karl? Ordered my board from him and still no dice.???
Quote:
Originally Posted by MrD View Post
Ditto
Quote:
Originally Posted by bgpzfm142 View Post
Not good. Not good. I'd like to order 3 of these boards, which are needed for various projects.
Quote:
Originally Posted by Kestrel View Post
It sucks because I really wanted to buy another board or two from Karl, but thankfully it looks like Fabian/Blabla will be selling an alternative.
Hey Guys,

Very soon I will be taking over distribution of the Buchka Wasted Spark boards from Karl. I'll handle all the sales and shipping. Watch for details soon. Just wanted to let you guys know they will be available again!

Thanks,
Chris (aka Duder, aka CFlo)
Duder is offline   Reply With Quote
Old 01-07-2017, 05:50 AM   #303
Egez
Newbie
 
Join Date: Aug 2015
Location: Finland
Default

Nice to know Chris.
__________________
1992 | 245 Polar | B230F+T, 19T@1Bar
Egez is offline   Reply With Quote
Old 01-07-2017, 07:33 PM   #304
MrD
Newbie
 
Join Date: May 2015
Default

Quote:
Originally Posted by Duder View Post
Hey Guys,

Very soon I will be taking over distribution of the Buchka Wasted Spark boards from Karl. I'll handle all the sales and shipping. Watch for details soon. Just wanted to let you guys know they will be available again!

Thanks,
Chris (aka Duder, aka CFlo)
Cool. Is there a list of outstanding orders yet to be fulfilled?

edit: I recieved a refund from Karl :thumbsup:

Last edited by MrD; 01-08-2017 at 06:09 PM.. Reason: update
MrD is offline   Reply With Quote
Old 01-09-2017, 05:17 PM   #305
Dannyt0186
Newbie
 
Join Date: Nov 2016
Location: Connecticut
Default

Just to clear Karl's name, he has given me a refund and a honest apology regarding the issue. Great guy, but it's a shame I couldn't get my chip since I already have all the pieces....... no 2-step on bti boards..... .....*sigh*
Dannyt0186 is offline   Reply With Quote
Old 01-09-2017, 07:56 PM   #306
bgpzfm142
crossmember
 
bgpzfm142's Avatar
 
Join Date: Dec 2013
Location: Blue Mountains NSW, AU
Default

Quote:
Originally Posted by Duder View Post
Hey Guys,

Very soon I will be taking over distribution of the Buchka Wasted Spark boards from Karl. I'll handle all the sales and shipping. Watch for details soon. Just wanted to let you guys know they will be available again!
That's awesome news. I appreciate you're a busy man, but do you have a timeframe of when you'll be ready to rock and roll with these boards?

Edit/update: To answer my own question, a very short timeframe. Well done!

http://forums.turbobricks.com/showpo...34&postcount=1

https://cflomoto.com/
__________________


_______ THE FLEET (AKA good luck trying to park around here)
71 1800E | 74 142 (x2) | 74 145 | 79 242GT | 87 745T | 88 780 V6 | 93 945T
plus a Holden Commodore VT SS 5.7
feedback thread

Last edited by bgpzfm142; 01-11-2017 at 10:04 AM.. Reason: updated
bgpzfm142 is offline   Reply With Quote
Old 01-12-2017, 10:33 AM   #307
lookforjoe
Board Member
 
lookforjoe's Avatar
 
Join Date: May 2008
Location: Rockland County, NY
Default

Switched to Bosch powerstage.






Quote:
Originally Posted by malloy1 View Post

This should be the setup using these two parts:

Out From EZK: -> Into 203:____ Out From 203: -> Into 407:
1-4 output -------> Pin 2 _________ Pin 1 -------> Pin 3
2-3 output -------> Pin 7 _________ Pin 6 -------> Pin 1

Paul
This doesn't jive with the BTI indicated layout for connections between PS and coil - I wired mine following your layout & had to reverse the coil wires for it to run. It would seem I/O pins 2&1 are for 2,3 cyl, and 7&6 are for 1,4 cyl




Edit: Nevermind, the inputs from the board to the powerstage are reversed between the two schematics - that would account for it. My mistake was using your schematic as the wiring reference

Last edited by lookforjoe; 01-12-2017 at 10:39 AM..
lookforjoe is offline   Reply With Quote
Old Today, 06:34 PM   #308
sbabbs
Board Member
 
sbabbs's Avatar
 
Join Date: Dec 2006
Location: Rushing Lane, Scappoose, OR
Default



German DIN plugs! Double back up.

__________________

1977 242 16v AQ171C M47 3.73truetrac LH2.4
1984 245 D24 M46 ARP head studs Metal headgasket
1988 245 White slicktop M47 Wagon!
1990 745 B230FT M46 13c A-cam 3.54 540K MILES
1991 744 RSI rods pistons 2.5L 16v Holset Getrag 3.31 7.25 twin disc
1991 740SE B230FT NPR Strut braces IPD bar A cam 550cc EV14's
.
sbabbs is offline   Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On

Forum Jump


All times are GMT -4. The time now is 10:17 PM.

Powered by vBulletin® Version 3.8.9
Copyright ©2000 - 2017, vBulletin Solutions, Inc.