bionicbanana
Member
- Joined
- Jul 22, 2014
- Location
- CO
Looking for new rear springs for my 780 that has already had anti-nivomat conversion done.
I went to swap in new billy HDs today and the PO from years ago had made his own wooden spring seats (1/2" to 1" thick) on the bottom that obviously had been broken apart for god knows how long. Now the blue IPD rear springs will sit even lower, when my rear was already sagging badly before. They have lots of wiggle room with the trailing arm back in place and I'm almost certain they're un-cut. The original spring seats were still in there, and even doubled up on the driver's side...
I would love real stiff springs in the rear, and something just under stock height to fit eiker e1's comfortably, but I'm lost on what to get. I read somewhere about 240 overload springs for the rear may work with the pigtails cut, but would like some more opinions on it
Thanks
I went to swap in new billy HDs today and the PO from years ago had made his own wooden spring seats (1/2" to 1" thick) on the bottom that obviously had been broken apart for god knows how long. Now the blue IPD rear springs will sit even lower, when my rear was already sagging badly before. They have lots of wiggle room with the trailing arm back in place and I'm almost certain they're un-cut. The original spring seats were still in there, and even doubled up on the driver's side...
I would love real stiff springs in the rear, and something just under stock height to fit eiker e1's comfortably, but I'm lost on what to get. I read somewhere about 240 overload springs for the rear may work with the pigtails cut, but would like some more opinions on it
Thanks