dropped244
New member
- Joined
- May 1, 2007
Hey! I'm going to be pulling a complete motor, harness, ecm and exhaust from an 82t for a swap in my 79, is there anything else I should get off the turbo car?
Hello Guest, welcome to the initial stages of our new platform!
You can find some additional information about where we are in the process of migrating the board and setting up our new software here
Thank you for being a part of our community!
probably the most involved swap
you will need just about everything in the engine bay
Actually a B cam is not a good choice for a turbo engine, you'd be ahead of the game leaving the T cam in there.
Oh come on, Ken. Lots of guys have used B cams in the turbo motors. A couple of buddies of mine did and liked it over the stock T cam. It doesn't cost much to try it if he already has one on hand.
Oh come on, Ken. Lots of guys have used B cams in the turbo motors. A couple of buddies of mine did and liked it over the stock T cam. It doesn't cost much to try it if he already has one on hand.
Myles, the T falls off at 4500. The B cam is fine for a little more power at RPM on an NA engine.