bremms
New member
- Joined
- Nov 4, 2008
- Location
- Columbia,SC
Hey folks, I picked up an NA 240 with a driveline issue. The PO seems to have messed up and the output flange on the M47 trans has a badly damaged bolt hole along with the locating flange and the driveshaft alignment bushing. I check the usual sources and can’t seem to find any of the parts. I can probably work around by welding and reworking the flanges, but would rather not.
I’m looking for an M47 output flange, the centering adapter and bushing. Please contact me if you have these parts.
I’m looking for an M47 output flange, the centering adapter and bushing. Please contact me if you have these parts.