What is this?

orrob · 01-06-2018, 05:33 PM

Hey guys I just picked up a '93 240 wagon. PO had started some work on the engine. He pulled the fan, shroud, radiator, and water pump. I have the water pump, new timing belt, new radiator hoses, new crankshaft bearing, and thermostat. I found this lying in the pile of parts. So pardon my ignorance but what is it and where does it go? I am also replacing the red coolant pipe that runs from the water pump to the heating core(?) since mine is pretty corroded at the water pump junction. Anything else I should hit while things are opened up?
Thanks

OSUVolv · 01-06-2018, 05:39 PM

It bolts over your exhaust manifold. It would have a "preheat" hose attached to it, that then goes into your air box. You don't need it unless you want warm air going into your intake and helping your car get up to temp faster.

https://www.ipdusa.com/products/5448...-pre-heat-hose

swedefiend · 01-06-2018, 05:40 PM

Intake preheat pipe, mounts on exhaust manifold.

Worth about $0.25 scrap price (probably less) unless you live somewhere far north.

2manyturbos · 01-06-2018, 05:40 PM

That is the heat shield that bolts to the exhaust manifold. The pre-heat tube to the air cleaner box attaches to the round tube section of that shield.

orrob · 01-06-2018, 07:56 PM

thanks guys

ZVOLV · 01-07-2018, 11:41 AM

Just leave it on your desk to fail emissions testing.

Mr. V · 01-08-2018, 02:36 AM

Quote:

Originally Posted by ZVOLV

Just leave it on your desk to fail emissions testing.

His car just turned twenty-five years old, and emissions testing isn't required for cars of that age anymore.

01-06-2018, 05:33 PM	#1
orrob Newbie Join Date: Nov 2017	What is this? Hey guys I just picked up a '93 240 wagon. PO had started some work on the engine. He pulled the fan, shroud, radiator, and water pump. I have the water pump, new timing belt, new radiator hoses, new crankshaft bearing, and thermostat. I found this lying in the pile of parts. So pardon my ignorance but what is it and where does it go? I am also replacing the red coolant pipe that runs from the water pump to the heating core(?) since mine is pretty corroded at the water pump junction. Anything else I should hit while things are opened up? Thanks

01-07-2018, 11:41 AM	#6
ZVOLV <Master Tech> Join Date: Nov 2002 Location: California	Just leave it on your desk to fail emissions testing. __________________ No Start Thread

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

01-06-2018, 05:39 PM	#2
OSUVolv Board Member Join Date: Sep 2014 Location: Oregon	It bolts over your exhaust manifold. It would have a "preheat" hose attached to it, that then goes into your air box. You don't need it unless you want warm air going into your intake and helping your car get up to temp faster. https://www.ipdusa.com/products/5448...-pre-heat-hose

01-06-2018, 05:40 PM	#3
swedefiend ... Join Date: Jul 2004	Intake preheat pipe, mounts on exhaust manifold. Worth about $0.25 scrap price (probably less) unless you live somewhere far north.

01-06-2018, 05:40 PM	#4
2manyturbos Moderator Join Date: Mar 2003 Location: Monroe, OR USA	That is the heat shield that bolts to the exhaust manifold. The pre-heat tube to the air cleaner box attaches to the round tube section of that shield.

01-06-2018, 07:56 PM	#5
orrob Newbie Join Date: Nov 2017	thanks guys