740tankDriver
Post-Hypnotic Sigma
- Joined
- Aug 18, 2006
- Location
- Under your nose.
pull it out and replace it!
they love you
Hello Guest, welcome to the initial stages of our new platform!
You can find some additional information about where we are in the process of migrating the board and setting up our new software here
Thank you for being a part of our community!
pull it out and replace it!
i suggest you match injectors for a proper burn. i think the best injectors are the plate typre with four holes. increasing the pressure at the injectors, like pintle injectors increases potential to skew the spray pattern.
850s , they have the siemens deka injectors 0280155830...i think for the 2.4 liter engine. i had mine flowed to 440cc/min
i wonder what happens if i run it on gas for a tank with something like that?
also, consider what the ethanol was originally made from. corn, sugar, or cellulos
i dont know if you can do e85 on lh2.2
and this needs to be simplified. heres my e85 conversion that worked flawlessly
TLAO chips
012 maf
75lb injectors
3 degree ezk advance
.023 gap on bpr7es
made 260whp on that no reason to complicate it