• Hello Guest, welcome to the initial stages of our new platform!
    You can find some additional information about where we are in the process of migrating the board and setting up our new software here

    Thank you for being a part of our community!

SRS light after steeringwheel swap

Mr.Borrie

Mr.Borrie

The Sneaky F*ing Ukrainian
Joined
Aug 1, 2006
Location
Netherlands
Replaced the yuk steeringwheel in my 960 for a wooden one.
However when i charged it the SRS light came on.
Checked Wiring, swaped airbags, nothing..
I feel like i should reset it?
Tips?
 
I would try resetting and clearning the code. The airbag system has a backup power supply. So maybe it was still powering the system when you removed the steering wheel causing a code?
 
dl242gt said:
I would try resetting and clearning the code. The airbag system has a backup power supply. So maybe it was still powering the system when you removed the steering wheel causing a code?
Click to expand...

Come to think of it, i did not take the battery off
 
Did you let the clock spring un-coil? It may have been damaged.

There is a trick to getting it back on correctly if it's been un-coiled: Count how many turns it takes to completely wind it up and then divide by 2= how many turns you gotta coil it back up.
 
You must log in or register to reply here.
Back
Top