barkster1971
Member
- Joined
- Jun 8, 2009
- Location
- south lincolnshire
I need to make the aq171 head have the same sensors (and outlet to go to the heater matrix) as the b234 head. The holes are too small for the temp sensor and temp gauge sensor. The allen key headed bung is going nowhere also so I will have to use the 3 on the left.
https://www.flickr.com/photos/186009222@N04/50054592327/in/album-72157714892064058/
https://www.flickr.com/photos/186009222@N04/50054592327/in/album-72157714892064058/
Last edited: