GeneralBurrito
Member
- Joined
- Nov 22, 2017
- Location
- California
Last week, I swapped out the spark plugs (gapped to .03") about 10 minutes after driving to the parts store to get dielectric grease and coming back. The engine was still decently hot, but it did have a little bit of time to cool down. I read that you should always change plugs when the head is cold if it's made of aluminum. I'm a little paranoid that I might've done something wrong. And I tightened them down hand tight with 1/8 turn after from an 8" rachet to be a snug fit. It's been driving fine, a lot better actually since the old plugs had a .04", just wondering if I swapped/installed the new ones wrong.