tomasss
former PRVert
- Joined
- Oct 13, 2008
- Location
- Sydney, Australia
Some progress finally.
Engine went out of the car.
M46 removed.
Clutch & PP removed, found out my flywheel is bit >tired<
In the meantime I have at least removed the rust & repainted the oil pan, when I was there I checked all oil squirters are intact. Also cleaned the oil suction pipe screen.
Luckily I also checked the seal at the other end of the oil suction pipe. This seal was completely torn so new one is on the way.
Engine went out of the car.
M46 removed.
Clutch & PP removed, found out my flywheel is bit >tired<
In the meantime I have at least removed the rust & repainted the oil pan, when I was there I checked all oil squirters are intact. Also cleaned the oil suction pipe screen.
Luckily I also checked the seal at the other end of the oil suction pipe. This seal was completely torn so new one is on the way.
Last edited: