Bricky McBrickface
New member
- Joined
- May 7, 2019
Hey, figured I'd start a build thread and track my progress.
Located in Lethbridge Alberta.
Overall, the car is pretty decent shape.
Plan for the car is to just get it to be a nice clean daily driver cruiser. I wanted a cruising car while I rebuild an engine for my mustang. Once that car is back on the road, then maybe I'll do more heavy modification on this car.
IMG_9604 by Richard Brown, on Flickr
IMG_9606 by Richard Brown, on Flickr
IMG_9614 by Richard Brown, on Flickr
IMG_9628 by Richard Brown, on Flickr
IMG_9652 by Richard Brown, on Flickr
Done so far:
-New taillights (fixed broken lights)
-Headlight bulbs (fixed highbeam issue)
-Acquired and installed rear driver trim
-Air filter replacement
-Acquired and installed license plate lights (not working, wiring needs repair)
-New front speakers
-Door sensors
-LED dome lights
-Oil change
-Seafoam
-Fixed reverse light (didn't replace sensor, was unplugged - wiring needs future attention)
-Recharged AC
-Bought and replaced some interior clips
-New license plate bracket (modified to 2 bolt)
-Painted brake calibers bronze
-New wheels
-E code headlights
To do list:
-Replace hatch. Only real rust on the car, have replacement hatch from older 240. Just need to paint and install.
-Rear gate wiring. No wiper, defrost, unlock, license plate lights. Have passenger IPD harness, planning on making drivers side. Doing at same time as hatch replacement.
-1 door door not central un/locking
-Fix heated seats
-Timing Belt (have parts)
-Rear hatch panel repair
-Polish/paint correction
-Clean/paint parts
-Front lip repair
-Cruise control lever. Previous owner replaced lever with cheaper level w/out cruise, have cruise lever hanging to still allow use. Want to replace with correct lever.
-Odometer fix (have part)
-Rear hatch shocks (have part)
-Reverse light wiring
WTB:
-Cruise control lever
-Cool parts?
Located in Lethbridge Alberta.
Overall, the car is pretty decent shape.
Plan for the car is to just get it to be a nice clean daily driver cruiser. I wanted a cruising car while I rebuild an engine for my mustang. Once that car is back on the road, then maybe I'll do more heavy modification on this car.
IMG_9604 by Richard Brown, on Flickr
IMG_9606 by Richard Brown, on Flickr
IMG_9614 by Richard Brown, on Flickr
IMG_9628 by Richard Brown, on Flickr
IMG_9652 by Richard Brown, on Flickr
Done so far:
-New taillights (fixed broken lights)
-Headlight bulbs (fixed highbeam issue)
-Acquired and installed rear driver trim
-Air filter replacement
-Acquired and installed license plate lights (not working, wiring needs repair)
-New front speakers
-Door sensors
-LED dome lights
-Oil change
-Seafoam
-Fixed reverse light (didn't replace sensor, was unplugged - wiring needs future attention)
-Recharged AC
-Bought and replaced some interior clips
-New license plate bracket (modified to 2 bolt)
-Painted brake calibers bronze
-New wheels
-E code headlights
To do list:
-Replace hatch. Only real rust on the car, have replacement hatch from older 240. Just need to paint and install.
-Rear gate wiring. No wiper, defrost, unlock, license plate lights. Have passenger IPD harness, planning on making drivers side. Doing at same time as hatch replacement.
-1 door door not central un/locking
-Fix heated seats
-Timing Belt (have parts)
-Rear hatch panel repair
-Polish/paint correction
-Clean/paint parts
-Front lip repair
-Cruise control lever. Previous owner replaced lever with cheaper level w/out cruise, have cruise lever hanging to still allow use. Want to replace with correct lever.
-Odometer fix (have part)
-Rear hatch shocks (have part)
-Reverse light wiring
WTB:
-Cruise control lever
-Cool parts?
Last edited: