home register FAQ memberlist calendar

Go Back   Turbobricks Forums > General > article composition

 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
Old 05-25-2019, 09:38 AM   #29
Mbeas96
Board Member
 
Mbeas96's Avatar
 
Join Date: Aug 2017
Location: Charleston
Default

Leds are a good idea. That was my thought, that the pulses are to short for themultimeter to pick up so it just reads 12v constantly. I wired in the new connector and it seems I have 12v on both outputs all the way till the connector at the coil. 12v right before the connector, but if you check the pins it shows 0v.

So either I fudged up the reading before or both connectors had bad pins in them. Most likely I messed it up. But this time I'm positive there is 12v going to the coil on both outputs but somehow loses all voltage thru the 1-4 pin. I'm gonna try and grab some crimp connectors and do away with the land Rover connector for testing purposes
__________________
Quote:
Originally Posted by Mr.Bill View Post
You are not a man unless you've thrown up at a turbobricks meet.

My build thread: http://forums.turbobricks.com/showthread.php?t=340910

Last edited by Mbeas96; 05-27-2019 at 08:41 AM..
Mbeas96 is offline   Reply With Quote
 

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On

Forum Jump


All times are GMT -4. The time now is 08:04 PM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2019, vBulletin Solutions Inc.