home register FAQ memberlist calendar

Go Back   Turbobricks Forums > Mechanical > maintenance & nonperformance

Thread Tools Display Modes
Old 09-07-2019, 04:57 PM   #26
Board Member
Join Date: Nov 2002
Location: Northern Washington

Originally Posted by D.E View Post
If you have an impact it’s really quick and easy. Crawl under and zip off the three nuts on each side that hold the bracket to the subframe. Jack the engine up by the oilpan. Undo the M8 bolts holding the brackets to the block. Put the whole assembly in a vice and zip the nuts off. Replace rubber mount and put the whole thing back.

Maybe an hour for both sides including figuring out if the bolts take a 12 or 13mm wrench and then some swearing at that one M8 bolt by the oil filter.
Do be sure to pull the pair of screws holding the fan shroud in and shake it loose from the radiator.
Overkill is consistently more fun.
JohnLane is offline   Reply With Quote

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On

Forum Jump

All times are GMT -4. The time now is 12:17 AM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2020, vBulletin Solutions Inc.