home register FAQ memberlist calendar

Go Back   Turbobricks Forums > Mechanical > projects & restorations

Reply
 
Thread Tools Display Modes
Old 05-19-2018, 07:13 AM   #201
DET17
Reformed SAABaholic
 
Join Date: Nov 2009
Location: NW Georgia
Default

Quote:
Originally Posted by soclosenotnear View Post
I'm talking about the bsr heat shield. I just need to open up the hole for the amm to 3" and maybe relocate it slightly.
From memory, I laid out the 3" AMM hole opening on the original, moved just slightly F-R to get my K&N filter to clear my air box. Drilled new attachment holes 90* to the original hose in my air box (to resist the hose pull against it). Free handed with my dremel and cleaned the hole up with a tiny dremel drum sander. I think I put pics in my build thread?

So are running the 012 AMM without the air box right now?
__________________
Project "cheap thrills" build thread: http://forums.turbobricks.com/showth...67#post4211467

Feedback thread: http://forums.turbobricks.com/showthread.php?t=198746
DET17 is offline   Reply With Quote
Old 05-19-2018, 07:46 AM   #202
soclosenotnear
Board Member
 
Join Date: Oct 2011
Location: summerville, south carolina
Default

Quote:
Originally Posted by InTheWhite View Post
I solved the angle of the filter with a angel reducer from do88 for the stock amm to a 3" ITG filter.


Did you use the angle reducer just to fit your filter? Or, did you use it to create some sort of swirl before the air passes through the amm? I've read something along those lines is why the factory used an elbow.


Quote:
Originally Posted by DET17 View Post
So are running the 012 AMM without the air box right now?
Correct. I didn't want to go hacking up the heat shield before everything worked well together.
soclosenotnear is offline   Reply With Quote
Old 05-19-2018, 04:57 PM   #203
+Kardboard+
Chinese guy/Swedish rides
 
+Kardboard+'s Avatar
 
Join Date: Aug 2008
Location: Vancouver, Canada
Default

Quote:
Originally Posted by DET17 View Post
From memory, I laid out the 3" AMM hole opening on the original, moved just slightly F-R to get my K&N filter to clear my air box. Drilled new attachment holes 90* to the original hose in my air box (to resist the hose pull against it). Free handed with my dremel and cleaned the hole up with a tiny dremel drum sander. I think I put pics in my build thread?

So are running the 012 AMM without the air box right now?
Love the project thread, wish I'd seen it before!

I can't find a listing for that heat shield you have. Same BSR one as OP?
__________________
'88 245DL Uncle Sven|'95 945T Darth Haul|'82 242GLT B23E Lumpy the Angry Viking (sold)|'77 244DL, red/sold.|'90 744T C3P-LOL, gold/sold

mtd240: I suspect "the wives" have a super-secret forum to discuss whether or not they will let us buy Volvo parts.
DavidSamuels: Not a website, a panel discussion/reality show. Real Housewives of Gothenburg.

-Feedback-
+Kardboard+ is offline   Reply With Quote
Old 05-19-2018, 06:51 PM   #204
InTheWhite
Board Member
 
InTheWhite's Avatar
 
Join Date: Jan 2017
Location: Sweden
Default

Quote:
Originally Posted by soclosenotnear View Post
Did you use the angle reducer just to fit your filter? Or, did you use it to create some sort of swirl before the air passes through the amm? I've read something along those lines is why the factory used an elbow.




Correct. I didn't want to go hacking up the heat shield before everything worked well together.
I used it for both those reasons. You should never put the airfilter directly on the amm.
InTheWhite is offline   Reply With Quote
Old 05-19-2018, 07:02 PM   #205
+Kardboard+
Chinese guy/Swedish rides
 
+Kardboard+'s Avatar
 
Join Date: Aug 2008
Location: Vancouver, Canada
Default

Quote:
Originally Posted by InTheWhite View Post
I used it for both those reasons. You should never put the airfilter directly on the amm.
What's the reason why?
+Kardboard+ is offline   Reply With Quote
Old 07-04-2018, 11:58 AM   #206
soclosenotnear
Board Member
 
Join Date: Oct 2011
Location: summerville, south carolina
Default

I've been driving my car a lot, I'm happy to report. I was able to open up the cutout in my air filter enclosure to accept my 3" 012 amm. Everything now fits together nicely.

I'm waiting on my m47 to give up the ghost, like everyone on this board toots. But it's holding its own at 20 psi from my 16t. I don't jam gears or drop the clutch. I do, however, get on the interstate in third gear wide open most days, and it's been handling it like a champ. It feels nice and strong.

Next on the agenda is still to button up my interior after relocating the battery to the trunk. I also still want to work out a bracket for the coil for the wasted spark system, as well as finish my exhaust in 3" through the tail pipe.
soclosenotnear is offline   Reply With Quote
Old 07-04-2018, 12:23 PM   #207
Duder
His Dudeness, El Duderino
 
Duder's Avatar
 
Join Date: Dec 2009
Location: Torrance, CA
Default

Quote:
Originally Posted by soclosenotnear View Post
I've been driving my car a lot, I'm happy to report. I was able to open up the cutout in my air filter enclosure to accept my 3" 012 amm. Everything now fits together nicely.

I'm waiting on my m47 to give up the ghost, like everyone on this board toots. But it's holding its own at 20 psi from my 16t. I don't jam gears or drop the clutch. I do, however, get on the interstate in third gear wide open most days, and it's been handling it like a champ. It feels nice and strong.

Next on the agenda is still to button up my interior after relocating the battery to the trunk. I also still want to work out a bracket for the coil for the wasted spark system, as well as finish my exhaust in 3" through the tail pipe.
My coil bracket project went to the far back burner - sorry about that...

I think you're on to something with the M47 assessment. For these old cars it seems lot of transmission life (after turning up the boost) depends on the driver. I'm not too hard on my 242 since it's mostly a DD, and my 300k mile M46 is holding up fine behind the B230FT swap. It might be making around 175hp at the flywheel. M46 still shifts cleanly and doesn't make much noise at all. As soon as I start cranking up the power I'm sure its remaining lifetime will be reduced, but until then, I'm having fun but not abusing the thing.
Duder is offline   Reply With Quote
Old 07-05-2018, 06:55 AM   #208
DET17
Reformed SAABaholic
 
Join Date: Nov 2009
Location: NW Georgia
Default

Quote:
Originally Posted by +Kardboard+ View Post
Love the project thread, wish I'd seen it before!

I can't find a listing for that heat shield you have. Same BSR one as OP?
Missed this post; if you are referring to my Eurosport Tuning air box, it looks identical to the BSR which the OP has in his 9. I suspect Frank setup a buy with private branding for their business...... mine came from an AZ partout years back. Well made and engineered piece, whomever designed it did well.
DET17 is offline   Reply With Quote
Old 07-22-2018, 05:51 PM   #209
soclosenotnear
Board Member
 
Join Date: Oct 2011
Location: summerville, south carolina
Default

My younger brother came by to drop off this wasted spark coil bracket. It came out pretty nice so thanks to him for that.



We popped the hood and cleaned the majority of my under hood grounds for gp. Redid a couple entirely also. They were all in poor shape. I'm not sure if it helped any but it couldn't have hurt.

I'm gonna make a post on it soon but what is the company these days to get a 19t upgrade kit from? Is ard tuning still the go to? There are cheaper eBay options. Curious to hear experience on "upgraded" 19t's?
soclosenotnear is offline   Reply With Quote
Old 08-01-2018, 08:38 PM   #210
soclosenotnear
Board Member
 
Join Date: Oct 2011
Location: summerville, south carolina
Default

Wasted spark bracket installed, again, courtesy of mbeas96. That finally puts me at about 99% completion on that project. It looks much more finished and in it's final resting place, just needs some sheath around the wiring and would be right at home for the most part.









Engine bay is filthy and my new telephone takes terrible pictures, which is ironic since I bought the phone for what was supposed to be a good camera.

Last edited by soclosenotnear; 08-03-2018 at 10:59 PM.. Reason: Never proofread
soclosenotnear is offline   Reply With Quote
Old 08-09-2018, 09:36 PM   #211
nitroboie
Board Member
 
Join Date: Mar 2009
Location: Charlotte, NC
Default

Quote:
Originally Posted by soclosenotnear View Post
I'm gonna make a post on it soon but what is the company these days to get a 19t upgrade kit from? Is ard tuning still the go to? There are cheaper eBay options. Curious to hear experience on "upgraded" 19t's?
I believe the general consensus is ard, but is there really another option other than kinugawa? I don't think you could go wrong with either one as you're just needing the compressor wheel and housing. Make sure the wheel you get is 56mm exducer!
nitroboie is offline   Reply With Quote
Old 08-10-2018, 01:49 PM   #212
soclosenotnear
Board Member
 
Join Date: Oct 2011
Location: summerville, south carolina
Default

The ebay option is not Kinugawa. I'd have to look it back up to figure out who was selling that one on ebay. So maybe there are three available options, but everything I've read points to ARD being the ticket, so I think you're right.
soclosenotnear is offline   Reply With Quote
Old 08-11-2018, 03:18 AM   #213
Acke
Board Member
 
Join Date: Feb 2012
Location: Finland
Default

Quote:
Originally Posted by soclosenotnear View Post
I'm gonna make a post on it soon but what is the company these days to get a 19t upgrade kit from? Is ard tuning still the go to? There are cheaper eBay options. Curious to hear experience on "upgraded" 19t's?
I've been running a kinugawa fwd 19t upgrade on a straight 7 hotside for two years now, and it works fine. The kits o-ring that seals the compressor housing was too thick/hard and I had to get an original mitsubishi one. Building a bracket for the actuator was not fun, in retrospect, I should have bought a rwd 19t/20t housing.
Acke is offline   Reply With Quote
Old 08-11-2018, 12:39 PM   #214
soclosenotnear
Board Member
 
Join Date: Oct 2011
Location: summerville, south carolina
Default

Have you two (or others) been satisfied with your 19t turbos? I'm hoping that's a 'final' turbo for this car. I'm wanting decent power and good reliability. Did it leave you wanting more, I guess is what I'm asking?
soclosenotnear is offline   Reply With Quote
Old 08-12-2018, 03:24 AM   #215
Acke
Board Member
 
Join Date: Feb 2012
Location: Finland
Default

Can you ever bee satisfied when it comes to power? It provides decent power and fast spool, and beeing bolt-on is nice. I'd say its a really good choice for a daily. As long as I'm summer dailying my 9 I'm going to stick with the 19t. For a pure fun car I'd probably pick something bigger, from what I've heard the TD05 series is nice, too.
Acke is offline   Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On

Forum Jump


All times are GMT -4. The time now is 11:40 PM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2018, vBulletin Solutions Inc.