Axd3nt
New member
- Joined
- Feb 4, 2015
- Location
- Pittsburgh
So I have replaced the brakes and rebuilt the calipers. I flushed the system and still experience the same sensation in the brake pedal. It will start firm, as if stopping, sits for a second, but slowly sinks maybe 1/4 ways to the floor, but never to the floor. I suspect the master cylinder seal is bad.
Now, would a master cylinder ever cause a CEL to come on?
And is there a trick to taking out the reservoir as not to snap the plastic on the MC?
Now, would a master cylinder ever cause a CEL to come on?
And is there a trick to taking out the reservoir as not to snap the plastic on the MC?