• Hello Guest, welcome to the initial stages of our new platform!
    You can find some additional information about where we are in the process of migrating the board and setting up our new software here

    Thank you for being a part of our community!

What wheel stud to get for my 1987 244?

K

killershrimp

New member
Joined
Jan 14, 2017
Location
PDX
Hey all,

Is there a specific wheel stud that I should buy to replace a broken one on my 1987 244? Sorry if I seem like I don't know what I'm talking about (I don't really:))! Any advice much appreciated.

Thanks!

killershrimp
 
I did studs today. Knocked an out with a punch and a sledge and pulled an back in with a stack of washers and an impact gun.
 
If I were changing a wheel stud on a 240, I'd use the correct part from Volvo and the Volvo special tools to change it. But that's just me. :-P

WheelStudTool.jpg
 
:omg:

^ Do want!

The 240 steering wheel nut makes a nice spacer to draw them back in too.

NB:

Be sure to snug the lugs after a drive down to the corner and back.
 
There's a ?" drive on the end of the screw and the arm keeps the tool from twisting. You don't have to worry about galling the threads on the stud either.
 
You must log in or register to reply here.
Back
Top