home register FAQ memberlist calendar

Go Back   Turbobricks Forums > Mechanical > projects & restorations

Reply
 
Thread Tools Display Modes
Old 11-12-2010, 01:27 AM   #1
DurableSwedish
Hunting for a turbo
 
DurableSwedish's Avatar
 
Join Date: Dec 2003
Location: Hillsboro, OR
Thumbs up Project Lucifer

I've been meaning on starting a project thread for a long time.
First off, Why did I name my car Lucifer? There are a few reasons which culminated into it's name:
#1: K-jet is evil:

#2: Every time anyone turns a wrench or works on this car they end up bleeding and cutting their hands or face or someplace on the car ends up with blood on it.
#3: in the bible, Lucifer was the most beautiful angel until his falling out with God, but he continues to persevere to rise again as the most powerful creation. Similar to my car, it was fully loaded with dealer installed intercooler and lots of other options. After 20+ years of neglect the car needs a lot of work to get back to it's former glory, but with my time and resources the car will end up better then when it left the factory


I bought this car on October 14 2004. I had just moved here from Virginia to start College in Pullman, WA in august and was tired of bumming rides everywhere. 3 months was all I could take with no car. I searched craigslist for a nice cheap 240 turbo. I found this one in non-running condition for $400.


My VW trained uncle worked his k-jet magic and got the car running for me enough to drive it from Seattle to Pullman without incident. I bombed around in it for a couple months until a failed fuel distributor grounded the car until I could find another one. Drive it for another couple months until the in tank fuel pump died.

I drove the car to a Volvo meet at the V-shop in Portland and back to meet some Volvo people and hopefully sell my car. Luckily the guy flaked out and I dove back to Pullman.

That same year I my grandparents wanted to go on a road trip, so they flew over to VA where my old car (1986 244DL) was and drove it back to Pullman for me so I could have a nicer reliable car to drive around.


I was trying really hard to sell my 244 to get money to pay bills so I drove it back to Portland for a potential owner and the in-tank fuel pump died and I had to stay at evansargent's house for a couple days while we figured out what was wrong with the car.


For some reason the car died and left me stranded in Tacoma so here it is on a trailer getting taken to another idiot shop:


Here is another picture of it dying in 245GT-Turbo's driveway due to the oil return line seals going out and losing over a quart of oil in less then a mile on my way back 300 miles to Pullman from Seattle


I really like this car, I got the turbo glowing pretty well after an 18psi 140mph midnight run with some friends on backroads in rural washington. I say 140mph because my speedometer was pointing at the H in "MPH" at 6000rpm in 5th gear on a extremely long stretch of road.


At some point the car was having issues running so I replaced the wiring harness with a low mileage Volvo updated harness and replaced all the upper end gaskets and replaced the head with a lower mileage one with no missing or stripped exhaust studs. I didn’t really know what I was doing so the car sat for 3 years while I finished college in non-running condition (because I missed plugging in the wire that went to the fuel system resistor).


It sat in this driveway for 2 years.

I graduated college and finished up my lease then moved to Volvo Mecca, Portland OR. Now that I was in a real city that had more than 3 repair shops in it (only one of the ones in Pullman would even work on my “import”) I got some advice and someone at work figured out the unplugged wire and the car has run well ever since.
I’ve had the car for a long time, but I keep getting distracted by school and bills and joining the military and more work and getting married, etc.


Lucifer sat here for 6 months while I was in boot camp/training school

I’m finally in a stable enough job that I can get started on my project. I have big plans for this car, as long as I don’t get distracted with other cars or too many bills I hope to get this car put together and start becoming what I’ve envisioned it to be very soon.


Lucifer currently resides at HM-Motorsports in Beaverton, seen giving life to fivedoorfury's wagon.


Here’s what I have to install on the car:
CaptainBondo SS exhaust header
DVS Group-A trunk spoiler
Haltech E6X
Complete EFI swap from K-jet
Yoshifab Phenolic intake manifold spacers
Low mileage 530 efi head that needs rsi stage III headwork done to it still
2 10” 700watt rms JBL sub woofers in custom upper shelf box powered by 1500watt alpine amp
Mp3/satellite stereo deck TBD
Roll of dynamat for the interior
Crack free black dash out of 92 240

Installed on the car:
Front ipd springs with 1 coil cut off, rear IPD lowering springs
IPD turbo cam
Old style ipd adjustable cam gear
VDO 25psi boost gauge
Low mileage T3 off of a 86 740 (after the 18psi I was running burned out the bearings and seals on my original 1982 turbo) @12psi
non a/c power steering setup, all a/c hardware was removed for 50lbs+ of wires, mounts, compressors, condensers, hoses, relays, fans and hoses
IPD 25/25 sway bars
Cherry turbo’s upper and lower chassis braces
The rest of the interior conversion from ripped brown leather to brown cloth out of an 86
AEM UGO wideband O2 gauge
Perin MBC


Here’s an inspirational photo that I’m forming my build around:


I’ve got a lot of work to do on the car still, but it will be lots of fun to drive when I get the stuff I have laying around installed. I plan on getting the car sorted out enough to do Auto-x to start out and work my way up to a couple track days.


Weight reduction Total Post
__________________
One Volvo left.
1982 244ti (313chp), 2011 Audi S4 (333chp) , 2016 Kawasaki 650R (76chp)

Last edited by DurableSwedish; 12-05-2015 at 05:42 PM..
DurableSwedish is offline   Reply With Quote
Old 11-12-2010, 02:00 AM   #2
Ansel+
ABG
 
Ansel+'s Avatar
 
Join Date: Aug 2009
Location: Portland, Oregon
Default

Hey it's my car's twin, glad you finally made a build thread!
Ansel+ is offline   Reply With Quote
Old 11-12-2010, 02:14 AM   #3
WeezilUSA
Board Member
 
WeezilUSA's Avatar
 
Join Date: Nov 2002
Location: Vancouver WA
Default

Nice build thread so far man... Car has some potential, I love your plans! Make it happen!
__________________
1983 242 ICSCC GP Race Car
WeezilUSA is offline   Reply With Quote
Old 11-12-2010, 03:17 AM   #4
DurableSwedish
Hunting for a turbo
 
DurableSwedish's Avatar
 
Join Date: Dec 2003
Location: Hillsboro, OR
Default

haltech+holstet+rsi stage III head+25psi=win (also dead M46 and rear differential lol)
DurableSwedish is offline   Reply With Quote
Old 11-12-2010, 06:21 AM   #5
swedishK
Design by Beefsma
 
swedishK's Avatar
 
Join Date: Sep 2008
Location: Soldotna, Alaska
Default

aboot time you made a thread.
__________________
grand luxe touring til i die.
Prof. Dr. Dr. Andrew Schaafsma
Quote:
Originally Posted by Quin View Post
...weld the diff, and proceed to everywhere.
swedishK is offline   Reply With Quote
Old 11-12-2010, 12:09 PM   #6
DNAsEqUeNcE
†John3:16
 
DNAsEqUeNcE's Avatar
 
Join Date: Jan 2009
Location: Dallas
Default

it would be unwise to name this car after the enemy, whose name is blotted out from the books of Heaven forever and ever.

Also, knowing fully the utter defeat of the devil........ reconsider!!!!
__________________
DNAsEqUeNcE is offline   Reply With Quote
Old 11-12-2010, 01:04 PM   #7
Crazychopstick
(/// _ - )
 
Crazychopstick's Avatar
 
Join Date: Dec 2004
Location: Receiving Transmission from David Bowie nipple antenna
Default

Quote:
Originally Posted by DNAsEqUeNcE View Post
it would be unwise to name this car after the enemy, whose name is blotted out from the books of Heaven forever and ever.

Also, knowing fully the utter defeat of the devil........ reconsider!!!!
Dude. Settle down Brett.

Love the project. Great back story for the car too.
Crazychopstick is offline   Reply With Quote
Old 11-12-2010, 01:16 PM   #8
Cameron
ドクターマリオ
 
Cameron's Avatar
 
Join Date: Dec 2006
Location: Crawling around under the car
Default

Quote:
Originally Posted by DNAsEqUeNcE View Post
it would be unwise to name this car after the enemy, whose name is blotted out...
Project Voldemort?
Cameron is offline   Reply With Quote
Old 11-12-2010, 01:48 PM   #9
DNAsEqUeNcE
†John3:16
 
DNAsEqUeNcE's Avatar
 
Join Date: Jan 2009
Location: Dallas
Default



humor and seriousness
DNAsEqUeNcE is offline   Reply With Quote
Old 11-12-2010, 01:53 PM   #10
WeezilUSA
Board Member
 
WeezilUSA's Avatar
 
Join Date: Nov 2002
Location: Vancouver WA
Default

Quote:
Originally Posted by Cameron View Post
Project Voldemort?


He who must not be named.
WeezilUSA is offline   Reply With Quote
Old 11-12-2010, 01:58 PM   #11
Cameron
ドクターマリオ
 
Cameron's Avatar
 
Join Date: Dec 2006
Location: Crawling around under the car
Default

Quote:
Originally Posted by WeezilUSA View Post
He who must not be named.
I think that's what I'll start calling my wagon



You shooting for any specific timeline goals on the 244? Trying to get it registered and back on the road by spring?
Cameron is offline   Reply With Quote
Old 11-12-2010, 02:13 PM   #12
Crazychopstick
(/// _ - )
 
Crazychopstick's Avatar
 
Join Date: Dec 2004
Location: Receiving Transmission from David Bowie nipple antenna
Default

I need a black and evil 240.
Crazychopstick is offline   Reply With Quote
Old 11-12-2010, 03:33 PM   #13
DurableSwedish
Hunting for a turbo
 
DurableSwedish's Avatar
 
Join Date: Dec 2003
Location: Hillsboro, OR
Default

All it needs is a cheap cat welded on it to pass. I wanted to get a TLAO exhaust, but thats $500 that needs to go elsewhere for christmas, etc. I've got a stock 240t cat/dp that just needs to be put on to the current exhaust somehow.
DurableSwedish is offline   Reply With Quote
Old 12-29-2010, 02:58 AM   #14
DurableSwedish
Hunting for a turbo
 
DurableSwedish's Avatar
 
Join Date: Dec 2003
Location: Hillsboro, OR
Default

taken a couple days ago:

Christmas spending burnt me out, but I got a stock 240T downpipe with cat that will be going on soon, then drive it to DEQ and try and get some plates on it. Shooting for January/Febuary for plates.
DurableSwedish is offline   Reply With Quote
Old 12-29-2010, 03:25 AM   #15
Josh
Board Member
 
Join Date: Dec 2009
Location: Portland, OR
Default

nice wheels. 17"?
Josh is offline   Reply With Quote
Old 12-29-2010, 03:26 AM   #16
Wagoneer855
Board Member
 
Join Date: Oct 2008
Location: London, Ontario
Default

Is that an actual Volvo ad? That is awesome!
__________________
'89 744ti M46 - MINE
'90 764ti - brother's
'91 245 - brother's
'93 964 - brother's
'96 854 T5 - father's
'97 855 LPT -> HPT M56H - MINE
'97 854R - girlfriend's
'03 XC70 2.5T - mother's
'04 XC90 T6 - father's
Wagoneer855 is offline   Reply With Quote
Old 12-29-2010, 04:11 AM   #17
MasterCylinder
What a lovely day!
 
MasterCylinder's Avatar
 
Join Date: Oct 2005
Location: The Fred Durst Society of the Humanities and Arts
Default

Mmmm k-junk


Project Morning Star?
__________________
Quote:
Originally Posted by CAPT_BLOTTO View Post
Wait. T-5 to T5? You can't do that. That's like against the rules.

'90 745ti '02 WRX Wagon '81 Corolla SR5
Master Cylinder Music
MasterCylinder is offline   Reply With Quote
Old 12-29-2010, 03:42 PM   #18
DurableSwedish
Hunting for a turbo
 
DurableSwedish's Avatar
 
Join Date: Dec 2003
Location: Hillsboro, OR
Default

17" Enkei OR52, 225/45ZR17 tires
DurableSwedish is offline   Reply With Quote
Old 01-13-2011, 03:44 PM   #19
DurableSwedish
Hunting for a turbo
 
DurableSwedish's Avatar
 
Join Date: Dec 2003
Location: Hillsboro, OR
Default

Update: Changed the oil for once, the car has been sitting for a while so the oil was very old and worn out. Put in 5 quarts of Royal Purple 10w30 syn with OEM Volvo oil filter and a can of BG MOA oil detergent.

While it was up in the air we noticed that the outer tie rods were garbage, the boots were missing off them and the spindle had almost come out of the right side. Planning on getting an alignment done to it this afternoon. We also put on a factory catalytic converter and discovered that a previous owner put 2.5" exhaust on it instead of the 2.25 that came on it from the factory.

edit: Just got a front end alignment. Drives much better now! Next up, trip permit and driving it to DEQ!

Last edited by DurableSwedish; 01-13-2011 at 08:31 PM..
DurableSwedish is offline   Reply With Quote
Old 01-13-2011, 05:47 PM   #20
The Plague
Professional Creeper
 
The Plague's Avatar
 
Join Date: Feb 2007
Location: Salem, Or
Default

Awesome Butters! I love the pic of our cars with the jumper cables. It reminds me of drunk buddies trying to stumble home. "Done wurry man I gatchuh I gat cha.."
The Plague is offline   Reply With Quote
Old 01-13-2011, 07:38 PM   #21
Josh
Board Member
 
Join Date: Dec 2009
Location: Portland, OR
Default

Quote:
Originally Posted by DurableSwedish View Post
We also put on a factory catalytic converter and discovered that a previous owner put 2.5" exhaust on it instead of the 2.25 that came on it from the factory.
wat. i thought the turbo cars had a 2.5" all the way through from the factory
Josh is offline   Reply With Quote
Old 01-13-2011, 07:56 PM   #22
The Plague
Professional Creeper
 
The Plague's Avatar
 
Join Date: Feb 2007
Location: Salem, Or
Default

My 82 had small exhaust but no cat in the DP. I'm not sure if 240 turbos came with 2.5.. I just know that myself along with a ton of people tweak 740T DPs for cheap and easy flow.
The Plague is offline   Reply With Quote
Old 01-13-2011, 07:58 PM   #23
DurableSwedish
Hunting for a turbo
 
DurableSwedish's Avatar
 
Join Date: Dec 2003
Location: Hillsboro, OR
Default

from what i've seen the n/a ones are 1 7/8 or 2" and the turbo cars are 2.25" That's why IPD has the stock turbo exhaust as an n/a upgrade.
DurableSwedish is offline   Reply With Quote
Old 01-14-2011, 05:24 AM   #24
John242Ti
LH-Jet & Carb Free Zone
 
John242Ti's Avatar
 
Join Date: May 2003
Location: Duvall, WA
Default

The exhaust is 2.5" from turbo to just in front of the rear axle, then it goes down to 2.25". Discovered that while trying to piece together the 2.5" catback exhaust on my '85 with a flanged piece of pipe so I could run the gutted cat pipe from my old black '82 242, instead of the broken and bent cat pipe that was on the car.

-J
__________________

1982 242Ti - black, M46. 1985 245Ti - blue, M46. Formerly Blue245Ti, 245GT-Turbo, and, originally 242GT-Ti.
John242Ti is offline   Reply With Quote
Old 02-19-2011, 04:28 PM   #25
DurableSwedish
Hunting for a turbo
 
DurableSwedish's Avatar
 
Join Date: Dec 2003
Location: Hillsboro, OR
Default

Passed emissions!!!
Installed new OEM shift knob, shift plate, OD button. Flushed the transmission with redline MTL. Installed new speedo cable w/ seals and found out that I need the new angle gear because mine is so worn out. I'm going to head to the DMV monday to get some plates on it now! It sounds so awesome. I'll have to get my wife to take a video of it's driveby. :-)
DurableSwedish is offline   Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On

Forum Jump


All times are GMT -4. The time now is 11:58 AM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2019, vBulletin Solutions Inc.