home register FAQ memberlist calendar

Go Back   Turbobricks Forums > Mechanical > projects & restorations

Reply
 
Thread Tools Display Modes
Old 05-15-2018, 01:50 PM   #1
Brandonium
Board Member
 
Join Date: Sep 2013
Location: Birmingham, AL.
Default The 142e decade build...or sooner hopefully.

I've had my '71 142 for about 5 years this upcoming December. I had planned on starting on the rebuild sooner but for life reasons I didn't. Since the car is now in my garage and I have daily access to it I have started preliminary work...or at least sketching out what I want, if it's doable and since I have no definite time frame for completion I suppose I can wait out any technical difficulties as they pop up.

Suspension


This 142 will not be lowered sadly. I know this probably goes against the grain but I just don't like the way my car rides, handles or looks lowered so I cam going to fill her out somewhat. Instead I will be tossing in the following for suspension:

- +50mm rear 5" coils
- +25mm front 5" coils
- Adjustable Panhard
- Adjustable Torque rods
- IPD Sways (already on vehicle)
- +50mm GAZ adjustable rear shocks
- +25mm GAZ adjustable front shocks
- Weller steelies 16x8 (5x108) ET-20
- Cooper Cobra P235/55R16 OWL

ECU / Electronics / Upgrades / Mods

I'm way past my lower appendage in trying to figure out the electronics and how I want that to play out. So far this is what I am planning:

- Rallye cluster (being rebuilt by Roger) with custom warning lights + Lambda and split out turn signals
- Two aircraft instruments that monitor oil temp / ambient air temp / Duel Fuel-Air ratio
- Arduino Rallye Cluster control including aircraft instruments
- Megasquirt ECU (MS3X)
- Speedhut GPS speedbox for Speedo
- Bluetooth / Aux / preamp output modified Volvo FM / 8-Track radio
- Raspberry Pi Android Auto
- Front / Rear Fogs
- Heated Seats
- Rear shelf A/C
- Backup camera
- TPMS
- Possibly RFID door lock/unlock and immobilizer (dead last on list of electronic upgrades to incorporate)

This is how I see the layout for this.

Engine sensors --> Megasquirt --> Arduino --> Gauges --> Pi

Only reason I want to send that data to pi is to have options such as having additional engine data present if I need it. There's a guy out there who has a python script taking engine data and basically assembling it into a trip computer of sorts.. I'd like to have that data available even if I don't use it immediately.

Pi will handle audio, GPS, Backup camera and whatever else I'm able to do.








Engine / Transmission

Definitely looking to get as much as I can out of it without it being bad mannered. I'll even look into going the Turbo route if need be. As of right now all I know I'm set on:

- ITB setup
- Engine balancing and blueprint
- Possible turbo / ITB setup (Turbo seems taboo this side of the pond but Swedes seem to like that option... and I trust the people who actually made the car ).
- If I can work out satisfactory power (180 hp) going the NA route then that is what I would prefer.
- I will probably keep the M41 since any other option out there will compromise the long throw shift and I love having a long throw in this car too much to sacrifice that. It just adds to the charm IMHO.

Body

- Full size spare mounted on vintage roof rack (I have the rack already but plan on only using the mounts and having a shop make me a sturdier variation).
- Two one up bike trays for the roof rack.
- Sliding rag top (75/25 at this point)
- Whatever body work and the necessary paint job. (only rust is in passenger spare tire well)
- Front Fogs / Rear Fog

Interior

- Re-upholstery
- Carpet
- Sound deadening

That's about it for now!
-Brandon
__________________
------------------------------------------
2016 Toyota 4Runner Trail Premium

1971 Volvo 142e

1977 International Scout II

Wish List

Saab Sonnet III

1979 Toyota Landcruiser (FJ60)

Whatever else tickles my fancy.
Brandonium is offline   Reply With Quote
Old 05-15-2018, 02:23 PM   #2
Cwazywazy
Board Member
 
Cwazywazy's Avatar
 
Join Date: Aug 2016
Location: Granby CT
Default

Nice. I love that afr gauge.
Cwazywazy is offline   Reply With Quote
Old 05-15-2018, 02:27 PM   #3
Redwood Chair
K-jet For Life
 
Redwood Chair's Avatar
 
Join Date: Mar 2007
Location: - Stock PSI Or Bust -
Default

Looks good but I doubt 235s are going to work at 20et.
__________________
Raise The Lowered


Image hosted by servimg.com

Quote:
Originally Posted by hiperfauto View Post
Folks on here don't know a good deal when they see it.
how psi stock cna support?

Redwood Chair is online now   Reply With Quote
Old 05-15-2018, 02:35 PM   #4
Brandonium
Board Member
 
Join Date: Sep 2013
Location: Birmingham, AL.
Default

There's a guy running 235's with -10 ET with overload 240 springs in the rear. He's already out there beyond what most feel fits. As long as the back is high enough you shouldn't have to worry about that. It's those who are lowering where that seems to be more of a concern.

Or am I missing something? I can attach pics of the 142 in question.

Quote:
Originally Posted by Redwood Chair View Post
Looks good but I doubt 235s are going to work at 20et.
Brandonium is offline   Reply With Quote
Old 05-15-2018, 02:38 PM   #5
Redwood Chair
K-jet For Life
 
Redwood Chair's Avatar
 
Join Date: Mar 2007
Location: - Stock PSI Or Bust -
Default

Quote:
Originally Posted by Brandonium View Post
Or am I missing something?



You're missing 20mm pal.
Redwood Chair is online now   Reply With Quote
Old 05-15-2018, 02:41 PM   #6
12david34
Board Member
 
Join Date: Sep 2012
Location: Slovak Rep.
Default

Quote:
Originally Posted by cwazywazy View Post
nice. I love that afr gauge.
+100
wow!
__________________
K-Jet über alles.
12david34 is offline   Reply With Quote
Old 05-15-2018, 02:50 PM   #7
Brandonium
Board Member
 
Join Date: Sep 2013
Location: Birmingham, AL.
Default

Hold on. I had to go back and re-read but we are talking -20 ET and not +20 ET right? The car in question is running -20 ET with that tire size so the only difference in mm between -10 and -20 ET is 10mm or .39"

Where is the 20mm coming from?

Quote:
Originally Posted by Redwood Chair View Post


You're missing 20mm pal.
Brandonium is offline   Reply With Quote
Old 05-15-2018, 02:53 PM   #8
Redwood Chair
K-jet For Life
 
Redwood Chair's Avatar
 
Join Date: Mar 2007
Location: - Stock PSI Or Bust -
Default

Quote:
Originally Posted by Brandonium View Post

Where is the 20mm coming from?


140 offset is 40.
Redwood Chair is online now   Reply With Quote
Old 05-15-2018, 05:08 PM   #9
MoCounselor
Board Member
 
MoCounselor's Avatar
 
Join Date: Jan 2015
Location: Midwest, USA
Default

Quote:
Originally Posted by Redwood Chair View Post


140 offset is 40.
This. 140 offset is not the same as 240 offset. 40mm stock = much higher offset. Similar to a lot of modern wrong-wheel drive cars.
MoCounselor is offline   Reply With Quote
Old 05-15-2018, 08:31 PM   #10
Redwood Chair
K-jet For Life
 
Redwood Chair's Avatar
 
Join Date: Mar 2007
Location: - Stock PSI Or Bust -
Default

^

A set of 16x7x43et V70 wheels would be a much better choice.
Redwood Chair is online now   Reply With Quote
Old 05-16-2018, 01:11 PM   #11
Brandonium
Board Member
 
Join Date: Sep 2013
Location: Birmingham, AL.
Default

I'm a steelie fan through and through. Ok so I double and tripled checked with the owner of said vehicle and questioned what his actual offset was and it winds up that it's actually +10 so my apologies.

So does +10 seem doable or even 0 et? I can always test with adapters just to see where the wheel sits before committing to a custom set of steel wheels which is probably what I will do. That is once my suspension components are in place.

Quote:
Originally Posted by Redwood Chair View Post
^

A set of 16x7x43et V70 wheels would be a much better choice.
Brandonium is offline   Reply With Quote
Old 05-16-2018, 05:27 PM   #12
Redwood Chair
K-jet For Life
 
Redwood Chair's Avatar
 
Join Date: Mar 2007
Location: - Stock PSI Or Bust -
Default

Quote:
Originally Posted by Redwood Chair View Post
^

A set of 16x7x43et V70 wheels would be a much better choice.
Quote:
Originally Posted by Brandonium View Post
I'm a steelie fan through and through. Ok so I double and tripled checked with the owner of said vehicle and questioned what his actual offset was and it winds up that it's actually +10 so my apologies.

So does +10 seem doable or even 0 et? I can always test with adapters just to see where the wheel sits before committing to a custom set of steel wheels which is probably what I will do. That is once my suspension components are in place.


The wheels I mentioned above are steel wheels.

And no unless you get the offset close see below.

Quote:
Originally Posted by Redwood Chair View Post
Stretch some 165s and it might work.
Redwood Chair is online now   Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On

Forum Jump


All times are GMT -4. The time now is 09:56 AM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2018, vBulletin Solutions Inc.