home register FAQ memberlist calendar

Go Back   Turbobricks Forums > Mechanical > projects & restorations

Reply
 
Thread Tools Display Modes
Old 05-15-2018, 01:36 PM   #601
Harlard
Pro Sneaker Peddler
 
Join Date: May 2007
Location: PDX
Default

Quote:
Originally Posted by Dirty Rick View Post
An MS2 v3.0 will do sequential injection and COP spark.
Put in a Peak&Hold board and use any injectors you want.
It won't do high res injector scaling, boost by gear, or be particularly fast. Just because the features exist doesn't mean that the implementation will be good, per se.
Harlard is online now   Reply With Quote
Old 05-15-2018, 05:12 PM   #602
Tfrasca
Board Member
 
Tfrasca's Avatar
 
Join Date: Apr 2015
Location: Aptos, CA
Default

Quote:
Originally Posted by Stiggy Pop View Post
Yes, I'm running semi-sequential fuel and wasted spark on my 242. 1kcc injectors paired on two outputs in conjunction with (4) d514a coils. I ran batch fuel the first year with micro then changed.

I was having a persistent issue with an rpm specific lean swing around 3k rpm. I cannot tell you how much time I spent chasing this, both through tuning and with hardware troubleshooting. You can ask Kenny how many emails we exchanged on the subject. After some discussion with Bobxyz on here I switched to semi-sequential on the fuel side. After making that change and doing a bit more tuning the issue is not completely eliminated but smoothed out to the point it is negligible for me. I did not notice any other major changes in the way it ran, but was also very focused on a specific issue.

It's worth noting that the issue above was not present when I ran the car with batch fuel and stock spark on a stock block. It presented after I put in a built motor and a big ported head with 48/40 valves. My well-running batch fire setups were just as smooth as the current semi-seq configuration in my opinion.

I spend a lot of money on my hobbies but there's other places on the car I think the $900 would have bigger payoff. If I keep the car I'll upgrade the micro eventually, but in the meantime I believe that all of my current minor complaints about the way the car runs are the result of my own lack of interest in tuning rather than any sort of inherent limitations with the setup as built.
That's good info, thanks. I'm with you on spending a lot on hobbies, but preferring to spend it efficiently.
Tfrasca is offline   Reply With Quote
Old 05-15-2018, 05:40 PM   #603
cosbySweater
Board Member
 
cosbySweater's Avatar
 
Join Date: Jul 2009
Location: Monterey/Falun
Default

Quote:
Originally Posted by Tfrasca View Post
Another thing I just realized - the ms3x is only like $700, vs $1300 for the ms3Pro. If ms3x does all the sequential stuff I might want, why wouldn't I get that. I guess I didn't realize there was a step between Micro and Pro.

TL;DR: Listen to Erik?
Just do ms3x. It's expensive yes but the car will just be so much easier to deal with. 300-400 bucks extra over micro. What will that amount of money net you? Is 400 dollars worth tearing your hair out over? Lol
__________________
1979 Volvo 244DL 6.0/4l80e,8.8,Ms3x goldbox ecu and Mircrosquirt tcu, s366 clone, 11.4@123mph 9psi
2005 Honda Civic Hybrid, 5 Speed
1991 Volvo 245, so stock it hurts, and I like it that way
1982 Ford Fairmont Futura, 4.8/th400, 8.8, mircrosquirt, 7875 turbo, 228/230 cam, Project Cheap Thrills

Quote:
Originally Posted by bricktop420 View Post
Thank you very much everybody... i now feel sufficiently retarded and will go cry in the corner...
cosbySweater is offline   Reply With Quote
Old 05-15-2018, 05:47 PM   #604
Tfrasca
Board Member
 
Tfrasca's Avatar
 
Join Date: Apr 2015
Location: Aptos, CA
Default

Quote:
Originally Posted by cosbySweater View Post
Just do ms3x. It's expensive yes but the car will just be so much easier to deal with. 300-400 bucks extra over micro. What will that amount of money net you? Is 400 dollars worth tearing your hair out over? Lol
Yeah, but I'm not totally psyched on the DIY style of the ms3x compared to the sealed case and nice connectors on either the Micro or the ms3Pro.
Tfrasca is offline   Reply With Quote
Old 05-15-2018, 06:17 PM   #605
cosbySweater
Board Member
 
cosbySweater's Avatar
 
Join Date: Jul 2009
Location: Monterey/Falun
Default

Quote:
Originally Posted by Tfrasca View Post
Yeah, but I'm not totally psyched on the DIY style of the ms3x compared to the sealed case and nice connectors on either the Micro or the ms3Pro.
Then do this
https://www.efisource.com/wp/shop/ms...on/#ecu-option

950 for the box and wayyyyyy better customer service then diy autotune. Also I don't know if you have been on the Ms forums but they seem to have been having alot of issues with the ms3 pro and Evo boxes lately. Even issuing a recall on them
cosbySweater is offline   Reply With Quote
Old 05-15-2018, 07:54 PM   #606
Tfrasca
Board Member
 
Tfrasca's Avatar
 
Join Date: Apr 2015
Location: Aptos, CA
Default

Quote:
Originally Posted by cosbySweater View Post
Then do this
https://www.efisource.com/wp/shop/ms...on/#ecu-option

950 for the box and wayyyyyy better customer service then diy autotune. Also I don't know if you have been on the Ms forums but they seem to have been having alot of issues with the ms3 pro and Evo boxes lately. Even issuing a recall on them
This looks promising. Josh was telling me about the issues with the newer MS3Pros.
Tfrasca is offline   Reply With Quote
Old 05-15-2018, 08:23 PM   #607
cosbySweater
Board Member
 
cosbySweater's Avatar
 
Join Date: Jul 2009
Location: Monterey/Falun
Default

I use the gold box with trans control on my 244, currently setting it up on a lt5 and going to start on a f20c swap with the gold box as well. They are great and Mike is so awesome to deal with
cosbySweater is offline   Reply With Quote
Old 05-15-2018, 09:49 PM   #608
Tfrasca
Board Member
 
Tfrasca's Avatar
 
Join Date: Apr 2015
Location: Aptos, CA
Default

Quote:
Originally Posted by cosbySweater View Post
I use the gold box with trans control on my 244, currently setting it up on a lt5 and going to start on a f20c swap with the gold box as well. They are great and Mike is so awesome to deal with
That's super cool to hear. It looks like with a harness, it ends up still over $1000. But like I was saying, it's not necessarily the money, but spending money on something that isn't great. Like an ms3Pro that is unreliable.

To be honest, I'm pretty sure I'd be happy with a Micro on semi-sequential, but for the amount of stuff I've had to redo on this car, I'm sick of cutting corners. I'm going to look into the Gold Box thing.

Luckily, I've got my LH running 12ish psi and it's liveable. That gives me some time to collect all the parts I'll need.
Tfrasca is offline   Reply With Quote
Old 05-16-2018, 12:04 AM   #609
cosbySweater
Board Member
 
cosbySweater's Avatar
 
Join Date: Jul 2009
Location: Monterey/Falun
Default

I will extend this offer as well, I have made good power with lh, depending on what you decide to do I know for a fact lh is reliable for a 300hp combo and I know how to wire and setup the Ms. If you want help with what is currently in you car I am more then willing to drive up and spend a day with you on it. Same goes for the Ms as well.
cosbySweater is offline   Reply With Quote
Old 05-16-2018, 02:49 AM   #610
FreeEMSFred
Board Member
 
FreeEMSFred's Avatar
 
Join Date: Nov 2009
Location: Kiwiland
Default

"It won't do high res injector scaling" LOL, what the hell is that? :-p

Tfrasca, sequential is heavily overrated. If you tune the injection timing it can produce a preferred result, depending on your preference, but if not timing-tuned then you might not get what you want.

On the flip side, if you have randomly timed (but timed, not oddball, not sure if MS does this) semi sequential injection, AKA bank/batch of 2 twice per cycle, then you get some fresh fuel mist and some vapour off the hot valves, and you get smoothness by default.

The biggest genuine reason to run sequential injection is having huge injectors where doing two pulses per cycle really hurts your real world error size.

Also, make sure you use something with the modern VR circuit, the stuff in old microsquirts was the same as the V3 board (ms1/ms2, what terrible naming) and is pretty much useless. The modern circuit (as used in all of my projects) is automatic and if configured correctly on the PCB pretty much perfect for any scenario.

Data point for you: I've been running semi sequential and pseudo wasted spark (4 Toyota COPs) on my B234F swapped 240 sedan for months now. Coils have held up to firing twice, once into a near-dead-short (highly ionised exhaust gas) fine despite only taking a guess at the dwell.

If a new style MicroSquirt has the new style VR, f*** the haters, and do what you want. I assume Deka 60s are 60lb, about 700cc/min, if so, you'll be okay at idle firing them twice, or even firing them once in a crappy pattern (can give an uneven idle due to different effective mixture from fresh fuel in some cyls and evaporated vapour in others, but won't wander and have error like the semi setup can).

As much as I hate all of those products for a thousand solid reasons, if you know what you're doing you can get good consistent results from the junk and enjoy your car for less dollars down. It won't be a redo scenario unless you do something dumb.
FreeEMSFred is offline   Reply With Quote
Old 05-16-2018, 07:24 PM   #611
Tfrasca
Board Member
 
Tfrasca's Avatar
 
Join Date: Apr 2015
Location: Aptos, CA
Default

Quote:
Originally Posted by cosbySweater View Post
I will extend this offer as well, I have made good power with lh, depending on what you decide to do I know for a fact lh is reliable for a 300hp combo and I know how to wire and setup the Ms. If you want help with what is currently in you car I am more then willing to drive up and spend a day with you on it. Same goes for the Ms as well.
I really want to go MS after looking into it. I'd like to learn a bit of tuning, and I'd love to get rid of the distributor, coil, and clean up some wiring. I'm still considering just doing semi-sequential on Micro, so I don't need to set up a cam angle sensor. Either that or the Gold Box.

But I'll for sure hit you up once I've got it all wired up. I have no idea how to tune one of these things. Thanks in advance!
Tfrasca is offline   Reply With Quote
Old 05-17-2018, 02:15 PM   #612
cosbySweater
Board Member
 
cosbySweater's Avatar
 
Join Date: Jul 2009
Location: Monterey/Falun
Default

Quote:
Originally Posted by Tfrasca View Post
I really want to go MS after looking into it. I'd like to learn a bit of tuning, and I'd love to get rid of the distributor, coil, and clean up some wiring. I'm still considering just doing semi-sequential on Micro, so I don't need to set up a cam angle sensor. Either that or the Gold Box.

But I'll for sure hit you up once I've got it all wired up. I have no idea how to tune one of these things. Thanks in advance!
For sure man!
cosbySweater is offline   Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On

Forum Jump


All times are GMT -4. The time now is 01:49 PM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2018, vBulletin Solutions Inc.