Vancity Volvos - Page 138

dirtbag240 · 09-27-2017, 06:32 PM

So ive made a mistake of fairly largeish proportions

i pick of a b230 block with the larger 63mm main bearings

the 2.5l crank i have has the smaller 55mm? mains

does anyone have a short block with the smaller main bearing theyd like to sell/gift/trade with me maybe?

unrelated note, anyone got an engine stand i could borrow for a bit?

+Kardboard+ · 09-29-2017, 12:59 PM

One of you blokes?

Quote:

https://vancouver.craigslist.ca/nvn/...319529267.html

From a 1986 Cobra Mustang. Was going to swap this into my Volvo 940 but it's not going to work for the power numbers I'm aiming for. Will work with the adapter kit in 240 740 940 and Fox body mustangs.

amargill19? · 09-29-2017, 01:19 PM

Quote:

Originally Posted by +Kardboard+

One of you blokes?

that'd be Patrick i'd guess

GTJordan · 09-29-2017, 03:40 PM

Quote:

Originally Posted by amargill19?

that'd be Patrick i'd guess

Yeah his power levels are so low he can't turn those ratios..... HA

+Kardboard+ · 09-29-2017, 03:49 PM

Quote:

Originally Posted by GTJordan

Yeah his power levels are so low he can't turn those ratios..... HA

+Kardboard+ · 09-30-2017, 11:41 AM

Might not make it out to Timmy's in time, because baby. Will be quite late if I do make it, but I'll be at Cates Park for sure.

StanleyR · 09-30-2017, 12:21 PM

Quote:

Originally Posted by +Kardboard+

but I'll be at Cates Park for sure.

that's all that matters!

amargill19? · 09-30-2017, 12:31 PM

Ok this Tims parking lot is absolutely ridiculous

StanleyR · 09-30-2017, 10:11 PM

Nice turnout

Sadly I didn't have my camera equipment with me :(

Mark · 10-02-2017, 01:07 PM

Sorry I missed it.

M.

ermit71 · 10-02-2017, 11:11 PM

Does anyone have a 87 or 88 740 turbo engine harness?

swedishiron.com · 10-04-2017, 12:04 AM

Quote:

Originally Posted by ermit71

Does anyone have a 87 or 88 740 turbo engine harness?

Yes, I do and I replied to your wanted ad.

ermit71 · 10-04-2017, 12:52 AM

Quote:

Originally Posted by swedishiron.com

Yes, I do and I replied to your wanted ad.

Cheers,

I am checking with the guy who wants it. I will get back to you shortly.

J

Mark · 10-06-2017, 02:26 PM

So, new car has landed and I want my garage back.

One last try before more drastic measures.

Reposted from earlier...

76 265 with clean title
350 Chevy V8 with a lumpy cam
Full intake setups for both TPI and TBI.
Serpentine belt assembly
Shorty stainless headers
Brand new compact starter
dual Efan with a new fan motor
Brand new 28mm IPD deep drop front swaybar
T56 6 spd transmission with a new clutch.
Unfinished Narrowed 8.8 Rearend (already narrowed, needs brackets welded on)
Kaphlenke Spherical Bushings
One of a kind Bondo custom watts link mount and modified 8.8 diff cover
Full mandrel dual exhaust from another V8 swap
EDIS coilpacks with custom trigger wheel.
Megasquirt 2.2 v3
Walbro 255hp
Flathood
Early single rounds with new replaceable bulb headlights
Saab leather seats
Tons of stainless hardware
Wilwood clutch master cylinder
Hydraulic modified clutch pedal box
Front homemade coilovers
VDO Millennium white face gauges
redrilled front hubs to 5x4-1/2.

Tons of other cool parts I can't remember at the moment.

This is wholeheartedly a project as the car is in a million pieces at the moment and requires real fabrication to finish and install the 8.8 and watts link. That said, it's a solid starting place to turn into a properly nice V8 swapped wagon. The plan was to turbocharge it and the powertrain was chosen around a 400-500 whp car.

I haven't totalled it up, but I figure just in parts I've got well over 5 grand CAD, not including the car.

$2500 CAD and take it off my hands. This is less than half the value just in parts. This is a good opportunity for someone who's got some time to deal with a partout to make some cash even if you don't want to finish it...

Thanks,

Mark

Turbo'd 24erty4er · 10-12-2017, 01:34 PM

Anyone interested in a grey cloth interior from a 1994 945? Had to use the driver's seat but have the passenger as well as complete rear assembly, pretty good condition as well. Yours for the taking. Once I scrape the 944 16V the seats will be going with it so if anyone wants it don't wait too long. Non power.

dirtbag240 · 10-22-2017, 11:19 PM

Anyone have a pre 1987 b230 hanging around

Also does anyone know who owns the p1800 on river road?

Double02 · 10-23-2017, 11:44 AM

@Mark - What's the new car?

Mark · 10-25-2017, 05:53 PM

Athal and Dale corrupted me...

My still-in-the-shop, haven't-seen-it-in-real-life-yet, waiting-for-inspection, 2000 AMG e55t.

M.

lordhelmet · 10-25-2017, 09:55 PM

That colour! Nice looking vehicle. Athal and Dale got me too. We'll have to have a gettogether one of these days.

Double02 · 10-26-2017, 10:56 AM

Whoa. Not what I was expecting from you Mark

Congrats!

+Kardboard+ · 10-26-2017, 12:22 PM

What is this, Benz Bricks now?

Mark · 10-26-2017, 01:57 PM

Quote:

Originally Posted by +Kardboard+

What is this, Benz Bricks now?

EDIT - For me the problem is that I've no interest in FWD/AWD, and Volvo doesn't make a modern(ish) RWD car. BMW and MB do though...

M.

+Kardboard+ · 10-27-2017, 12:12 PM

Can't pay to play. :( Still not driving Darth regularly, crankcase pressure issues and other mileage issues still costing too much. Time is hard to find to wrench on the car. :/

Mark · 10-27-2017, 08:04 PM

Of note, if anyone is interested/worried/whatever, I'm keeping the Fridge. I have plans to deal with some of the bigger projects on it that I've been putting off while hammering on it as a daily.

M.

+Kardboard+ · 10-27-2017, 08:20 PM

Quote:

Originally Posted by Mark

Of note, if anyone is interested/worried/whatever, I'm keeping the Fridge. I have plans to deal with some of the bigger projects on it that I've been putting off while hammering on it as a daily.

M.

Yay!

10-02-2017, 11:11 PM	#3436
ermit71 Board Member Join Date: Sep 2007 Location: Vancouver, BC	Does anyone have a 87 or 88 740 turbo engine harness? __________________ Feedback Last edited by ermit71; 10-02-2017 at 11:17 PM..

10-23-2017, 11:44 AM	#3442
Double02 Board Member Join Date: Dec 2009 Location: Vancouver	@Mark - What's the new car? __________________ Bruce '58 Citroen 2CV - Grey '82 Peugeot 604 - Black '85 Renault R5 - Silver '91 Mazda Miata - BRG '06 V70 2.5T - Grey

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

09-27-2017, 06:32 PM	#3426
dirtbag240 Board Member Join Date: Feb 2017 Location: vancouver canada	So ive made a mistake of fairly largeish proportions i pick of a b230 block with the larger 63mm main bearings the 2.5l crank i have has the smaller 55mm? mains does anyone have a short block with the smaller main bearing theyd like to sell/gift/trade with me maybe? unrelated note, anyone got an engine stand i could borrow for a bit?

09-30-2017, 11:41 AM	#3431
+Kardboard+ Chinese guy/Swedish rides Join Date: Aug 2008 Location: Vancouver, Canada	Might not make it out to Timmy's in time, because baby. Will be quite late if I do make it, but I'll be at Cates Park for sure.

09-30-2017, 12:31 PM	#3433
amargill19? Barry McCockiner Join Date: Aug 2005 Location: 604	Ok this Tims parking lot is absolutely ridiculous

09-30-2017, 10:11 PM	#3434
StanleyR Board Member Join Date: Oct 2011 Location: Location: Location:	Nice turnout Sadly I didn't have my camera equipment with me :(

10-06-2017, 02:26 PM	#3439
Mark sex lights Join Date: Dec 2006 Location: Vancouver	So, new car has landed and I want my garage back. One last try before more drastic measures. Reposted from earlier... 76 265 with clean title 350 Chevy V8 with a lumpy cam Full intake setups for both TPI and TBI. Serpentine belt assembly Shorty stainless headers Brand new compact starter dual Efan with a new fan motor Brand new 28mm IPD deep drop front swaybar T56 6 spd transmission with a new clutch. Unfinished Narrowed 8.8 Rearend (already narrowed, needs brackets welded on) Kaphlenke Spherical Bushings One of a kind Bondo custom watts link mount and modified 8.8 diff cover Full mandrel dual exhaust from another V8 swap EDIS coilpacks with custom trigger wheel. Megasquirt 2.2 v3 Walbro 255hp Flathood Early single rounds with new replaceable bulb headlights Saab leather seats Tons of stainless hardware Wilwood clutch master cylinder Hydraulic modified clutch pedal box Front homemade coilovers VDO Millennium white face gauges redrilled front hubs to 5x4-1/2. Tons of other cool parts I can't remember at the moment. This is wholeheartedly a project as the car is in a million pieces at the moment and requires real fabrication to finish and install the 8.8 and watts link. That said, it's a solid starting place to turn into a properly nice V8 swapped wagon. The plan was to turbocharge it and the powertrain was chosen around a 400-500 whp car. I haven't totalled it up, but I figure just in parts I've got well over 5 grand CAD, not including the car. $2500 CAD and take it off my hands. This is less than half the value just in parts. This is a good opportunity for someone who's got some time to deal with a partout to make some cash even if you don't want to finish it... Thanks, Mark

10-12-2017, 01:34 PM	#3440
Turbo'd 24erty4er Board Member Join Date: Oct 2004 Location: Vancouver,B.C., Canada	Anyone interested in a grey cloth interior from a 1994 945? Had to use the driver's seat but have the passenger as well as complete rear assembly, pretty good condition as well. Yours for the taking. Once I scrape the 944 16V the seats will be going with it so if anyone wants it don't wait too long. Non power.

10-22-2017, 11:19 PM	#3441
dirtbag240 Board Member Join Date: Feb 2017 Location: vancouver canada	Anyone have a pre 1987 b230 hanging around Also does anyone know who owns the p1800 on river road?

10-25-2017, 05:53 PM	#3443
Mark sex lights Join Date: Dec 2006 Location: Vancouver	Athal and Dale corrupted me... My still-in-the-shop, haven't-seen-it-in-real-life-yet, waiting-for-inspection, 2000 AMG e55t. M.

10-25-2017, 09:55 PM	#3444
lordhelmet Board Member Join Date: Aug 2009 Location: Vancouver BC	That colour! Nice looking vehicle. Athal and Dale got me too. We'll have to have a gettogether one of these days.

10-26-2017, 10:56 AM	#3445
Double02 Board Member Join Date: Dec 2009 Location: Vancouver	Whoa. Not what I was expecting from you Mark Congrats!

10-26-2017, 12:22 PM	#3446
+Kardboard+ Chinese guy/Swedish rides Join Date: Aug 2008 Location: Vancouver, Canada	What is this, Benz Bricks now?

10-27-2017, 12:12 PM	#3448
+Kardboard+ Chinese guy/Swedish rides Join Date: Aug 2008 Location: Vancouver, Canada	Can't pay to play. :( Still not driving Darth regularly, crankcase pressure issues and other mileage issues still costing too much. Time is hard to find to wrench on the car. :/

10-27-2017, 08:04 PM	#3449
Mark sex lights Join Date: Dec 2006 Location: Vancouver	Of note, if anyone is interested/worried/whatever, I'm keeping the Fridge. I have plans to deal with some of the bigger projects on it that I've been putting off while hammering on it as a daily. M.