Chigga 744SE
Taiwan hillbilly
- Joined
- Nov 12, 2002
- Location
- On. Canada
where I can find more info abotu those engines?
I know they made V8s, but what are their capacity and hp?
I know they made V8s, but what are their capacity and hp?
Hello Guest, welcome to the initial stages of our new platform!
You can find some additional information about where we are in the process of migrating the board and setting up our new software here
Thank you for being a part of our community!
the 86mm crank would fit right into a redblock? would the stock pistons and rods work?945ti said:VOlvo penta rated many of their engines in output AKA
AQ151
AQ135 etc
There are 2.3, 2.5 and those seem teh popular ones. There is also a marine B30 with triple carbs on it making about 200HP. The marine engines are both B23/B21 and B200/B230 based. There are different crank sizes. The B230 based motors come with either 80mm or 86mm cranks. Just installing 86mm crank with appropiate rods and possible pistons will give 2490cc or 2.5L. The marine cam is oftenjust a K cam, I am not sure what head they use, but 151HP from a 2.5L would suggest a 531 head and K cam, though I remember that the marine engiens use a specialized head that isn't foundd on land bound stuff. With some strengthening a very late B230 might be able to bored that far over, but I would guess that the blocks are slightly stronger?
weezilusa said:Are B18's and B20's redblocks?
the poi said:isnt it realtively easy to chagne the direction of the motor?