turbovulvo
Member
- Joined
- Jul 2, 2009
- Location
- Omaha, NE
I plan on installing the new motor this week into the car and will be wiring up the LH 2.4, (i am converting my 88 from 2.2 to 2.4). I have a lh 2.4 gauge cluster. I have the speed sensor that measures the 2.4 flexplate. I have both of those installed (2.4 flexplate and speed sensor) Do I need to run a wire from pin 34 to some kind of sensor on the dif to make it idle normal or is that only for k-jet cars?
Getting so close to having a DD volvo for the first time!
Thanks
Getting so close to having a DD volvo for the first time!
Thanks