Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature currently requires accessing the site using the built-in Safari browser.
Hello Guest, welcome to the initial stages of our new platform! You can find some additional information about where we are in the process of migrating the board and setting up our new software here
Straight to the cast housing? Are you doing this yourself? You're either going to have to preheat the cast with a torch, not a rosebud, or do it as cold as possible. Preheat is the best method. 309 filler will work, but if you can find a nickel 99 welding rod, just knock the flux off it and use it as a filler rod. You're going to want to pool the stainless and pull it towards the cast. Cast is nasty. It has a lot of impurities, oil, and crap. You don't want that getting into the weld pool.
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.