- Joined
- Jan 1, 2006
- Location
- Southern Maryland
I will make this purchase
http://www.racetronix.com/17113744FM.html
http://www.racetronix.com/17113744FM.html
Hello Guest, welcome to the initial stages of our new platform!
You can find some additional information about where we are in the process of migrating the board and setting up our new software here
Thank you for being a part of our community!
I need to figure out how to bypass the resistor pack....
I will make this purchase
http://www.racetronix.com/17113744FM.html
then maybe the batch they are selling here in the US are junk ... I know of two middle sizes that seem to have a pretty bad failure rate
The only thing with these is you need hi res code to get a decent idle because the idle pulsewidth is very close to the injector opening period (mine is around 1.2xx ms at idle).
i will need the 95 lb'ers for the gt35r setup. good deal, couldn't resist.
Pic.Just cut the pigtail from an old/spare resistor pack, solder the ends of the 5 wires all together & plug it in
I'll have to keep an eye on mine. I'm running the 630cc ones.
and yes, one of my siemans injectors has failed. joy.