• Hello Guest, welcome to the initial stages of our new platform!
    You can find some additional information about where we are in the process of migrating the board and setting up our new software here

    Thank you for being a part of our community!

Construction Volvo 740 wagon (from Russia with love)

It came in the mail front wheels!
they are back, but the expansion is not 11 and 9 inches!

I took the used tire 245/40/18

c326a9es-480.jpg


cf26a9es-480.jpg


f26a9es-960.jpg


8f26a9es-480.jpg
 
bought used springs and dampers!
supra springs do not hold the weight of the Volvo (((
I hope this will keep TEIN weight!

if not, try to change the front and rear spring

66b1a9es-480.jpg


e6b1a9es-480.jpg


a6b1a9es-480.jpg
 
Last edited:
I began to weld the fuel tank!
60 liters
overflow tank 8 liters

We establish the pumps at an angle! 2 Bosch 44 and one drain (for pumping fuel into a small tank)
a733f5es-480.jpg


8ab3f5es-480.jpg



cut the intake manifold under the thermostat housing

4ab3f5es-480.jpg


3ab3f5es-480.jpg
 
sexy ! :) Is that a custom clutch?
/edit

Looked on the TTV page.. bam !! they updated their site and their portfolio.. what a blast :D

How mich is that clutch/flywheel setup?
 
Last edited:
sexy ! :) Is that a custom clutch?
/edit

Looked on the TTV page.. bam !! they updated their site and their portfolio.. what a blast :D

How mich is that clutch/flywheel setup?

yes! its custom


site they became completely incomprehensible!
the clutch is made to order with the flywheel!
the price was ? 1,300 + shipping
 
Back
Top