bent-grill
Member
- Joined
- May 5, 2012
- Location
- Portland Or.
Not a question but just an informative post for the search engine.
I bought an 83 245 and noticed it had gold plated (zinc chromate?) adjustable torque rods evidently from IPD. The rear bushings were shot and sloppy so I ordered a set from IPD but they were the wrong size and no one there seemed to know what to do. So I popped the bushings out and lo and behold there was a part number. Long story short they are Jeep tj control arm bushings and Daystar makes a kit with 8 of them PN KJ02038BK for 15-20 bucks. Dropped right in, looks like they came out of the same mold. I will report back with any issues if they pop up, so far so good.
I bought an 83 245 and noticed it had gold plated (zinc chromate?) adjustable torque rods evidently from IPD. The rear bushings were shot and sloppy so I ordered a set from IPD but they were the wrong size and no one there seemed to know what to do. So I popped the bushings out and lo and behold there was a part number. Long story short they are Jeep tj control arm bushings and Daystar makes a kit with 8 of them PN KJ02038BK for 15-20 bucks. Dropped right in, looks like they came out of the same mold. I will report back with any issues if they pop up, so far so good.
Last edited: