home register FAQ memberlist calendar

Go Back   Turbobricks Forums > Mechanical > performance & modifications

Reply
 
Thread Tools Display Modes
Old 08-20-2020, 11:16 AM   #1
martijn266
Newbie
 
Join Date: Apr 2020
Location: Zeeland, Netherlands
Default My '97 940se project

Hi!,
Got this nice 940se with "only" a couple of months ago and i was thinking about tuning this one properly. This tuning setup was the initial plan for my old 940 but that one didn't like the 2 minutes of revlimiter while doing donuts..... you probaly can guess how that ended. Cylinder walls were toast and one cilinder had no compression at all.

The new 940 is a much better start. No piston slap, no oil/coolant usage, stock headgasket and a lot of other signs of a healthy engine.

Now my setup
- td04 16t turbo
- 470cc bosch ev6 injectors (hoping to run a 19t on these aswell)
- ipd turbo cam
- 3" downpipe into a 2,5" simons exhaust system (thinking about a cat delete?)
- 3" maf from a volvo 960

Got myself a plx devices AFR gauge, and a proper VDO boost and oil pressure gauge.
martijn266 is offline   Reply With Quote
Old 08-20-2020, 11:17 AM   #2
martijn266
Newbie
 
Join Date: Apr 2020
Location: Zeeland, Netherlands
Default

I only need to know if and what chip i should get, does somebody maybe have that answer?
martijn266 is offline   Reply With Quote
Old 08-20-2020, 12:54 PM   #3
Sjeng
Board Member
 
Sjeng's Avatar
 
Join Date: Sep 2017
Default

You can try some of mine if you pm me your post address. I'm Dutch too.

I had a similar setup as you. 012/470cc opel injectors/18T.

Use at your own risk!

I got rid of the lean spot when it hits boost, and took fuel out at the top where LH turns ridiculously rich. Also retarded ignition a bit at high load, while increasing timing under cruise.
Sjeng is offline   Reply With Quote
Old 08-21-2020, 05:03 AM   #4
Triebwerk
Board Member
 
Join Date: Dec 2010
Location: Austria
Default

Quote:
Originally Posted by martijn266 View Post
I only need to know if and what chip i should get, does somebody maybe have that answer?
http://www.bijlsmatechnicalinnovations.nl/products.html
__________________
regards Mathias
[Austria]
Triebwerk is offline   Reply With Quote
Old 08-21-2020, 05:40 AM   #5
TurboDutch
Board Member
 
Join Date: Aug 2019
Location: Nieuw en Sint Joosland
Default

Martijn uit zeeland? Ik kan je wel aan een 18Ttje helpen
TurboDutch is offline   Reply With Quote
Old 09-01-2020, 05:57 AM   #6
J2_
Board Member
 
J2_'s Avatar
 
Join Date: Mar 2008
Location: Stroopwafel-land
Default

Jij wil iedereen aan een 18T helpen. Hou nou eens op met die babyturbo's man
J2_ is offline   Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On

Forum Jump


All times are GMT -4. The time now is 07:55 PM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2020, vBulletin Solutions Inc.