• Hello Guest, welcome to the initial stages of our new platform!
    You can find some additional information about where we are in the process of migrating the board and setting up our new software here

    Thank you for being a part of our community!

Preparation for 245 rear window install questions

PDX245T

New member
Joined
May 15, 2011
I will be installing the rear window soon, but I wanted to know what I should do with the light surface rust around the pinch?

hfWPsk3.jpg


52rBJwM.jpg
 
I would clean that up with some of those 2" abrasive discs. Then paint with something like POR15 or Eastwood rust encapsulator. Then the color of the car in a spray can. If you can get the rust paint behind the pinch weld by painting on the inside that will help it resist rust a lot longer.
 
So I’m finally going to rope in the window tomorrow, and I was curious if I need any sealer. It doesn’t appear that sealer was used originally?
 
Back
Top